Insta 360 CINSBAXA 6K Action Camera Photo Video User Guide

Insta 360 CINSBAXA 6K Action Camera Photo Video

Specifications

5.8GHz:
5725MHz~5850MHz
Output Power (E.I.R.P.)| 2.4GHz WIFI: 13dbm, 5.1GHz WIFI: 13dbm, 5.8GHz WIFI: 13dbm
Battery Capacity| 1700 mAh
Energy| 6.54 Wh
Operation Temperature| -20°C to 40°C

Product Usage Instructions

Insert Memory Card and Charge the Device

• Open the USB cover to insert a memory card and connect the device to a power source for charging using a 5V/2A powersupply.

Power On/Off and Screen Use

• To power on the device, press the body button once. To power off, press and hold the body button for 2 seconds. The reversible touch screen allows for easy navigation.

Installing Accessories

• The device features a two-claw quick release mechanism that allows you to install accessories like a selfie stick easily. Ensure that the battery UP logo is pointing upwards when attaching accessories.

Additional Information

• For more detailed tutorials and information on using the device, scan the provided QR code or visit the official website at https://www.insta360.com/guide/ace.

QUICKSTART GUIDE

1. Scan code to get detailed tutoria
   • https://www.insta360.com/guide/ace
2. Open the USB Cover to insert a memory card and connect to a power
3. Body button function
4. Screen Use
   • Reversible touch screen
5. The battery UP logo needs to point up
6. With two-claw quick release, you can install selfie stick and other accessories

Arashi Vision Inc. ADD: 11th Floor, Building 2, Jinlitong Financial Center, Bao’an District, Shenzhen, Guangdong, China WEB: www.insta360.com    TEL: 400-833-4360 +1 800 6920 360 EMAIL: service@insta360.com

EC REP

Insta360 GmbH Gartenfelder Straße 29-37, Gebäude 31/31.12 1.OG, 13599 Berlin,Germany+49 177 8567813  service@insta360.com

Insta360 Ace

Bluetooth
Operation Frequency| Blutooth: 2402~2480MHz
Output Power (E.I.R.P.)| ＜10dbm
WIFI
Operation Frequency| 2.4GHz WIFI: 2400~2483MHz

5.1GHz WIFI: 5150MHz~5250MHz;

5.8GHz WIFI: 5725MHz~5850MHz

Output Power (E.I.R.P.)| 2.4GHz WIFI: ＜13dbm;

5.1GHz WIFI: ＜13dbm;

5.8GHz WIFI: ＜13dbm.

Battery Capacity| 1700 mAh
Energy| 6.54 Wh
Operation Temperature| -20℃ – 40℃

Compliance Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment

FCC SAR：

1. The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact I s minimized during normal operation.The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted us ing standard operating positions accepted by the FCC with the device transmitting at its highest c ertified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the ma ximum value. This is because the device is designed to operate at multiple power levels so as to u se only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. For body worn operation, this model device has been tested and meets the FCC RF exposure.Guid elines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 5mm from the body
2.  For body-worn operation, the device has been tested and meets the FCC RF exposure, themaximum SAR value is 1.049 W/kg at 5mm.

IC STATEMENT

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:

1.  This device may not cause interference; and
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

IC SAR

1. For body-worn operation, the device has been tested and meets the IC RF exposure, The maximum SAR value is 1.049W/kg when the device used 5mm close to user.
2. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Declaration of Conformity
Arashi Vision Inc.hereby, declares that this product is in compliance with the essential requirement and other relevant provisions of the directive 2014/53/EU .

GB Compliance Statement
Arashi Vision Inc.hereby, declares that this product is in compliance with the essential requirement and other relevant provisions of Radio Equipment Regulations 2017.

The device is restricted to indoor use when operated in the European Community using frequency 5150MHz~5250MHz to reduce the potential for interference.

| BE| BG| CZ| DK| DE| EE
---|---|---|---|---|---|---
IE| EL| ES| FR| HR| IT
CY| LV| LT| LU| HU| MT
NL| AT| PL| PT| RO| SI
SK| FI| SE| UK(NI)| TR| NO
CH| IS| LI| | |

WEEE Directive
Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU/UK. To prevent possible harm to the  environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

Frequently Asked Questions (FAQ)

Q: What should I do if the device is not powering on?

A: Make sure the device is adequately charged by connecting itto a power source using the provided specifications. If the issue persists, contact customer service for assistance.

Q: How can I reset the device to its factory settings?

A: To reset the device, locate the reset button (if available) or refer to the user manual for specific instructions on resetting the device to its factory settings.

Q: Can I use third-party accessories with the Insta360 Ace?

A: While the device is compatible with various accessories, it is recommended to use official Insta360 accessories to ensure optimal performance and compatibility.

References

• Insta360 | Action Cameras | 360 Cameras | VR Cameras
• Insta360 | Action Cameras | 360 Cameras | VR Cameras

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>