GRENARO P12 Wireless Mic for Youtubers User Manual
- June 12, 2024
- GRENARO
Table of Contents
GRENARO P12 Wireless Mic for Youtubers User Manual
Product Operations
Wearing Method
The preferred location for attaching the transmitter is the collar near the
neck of the speaker.lf the speaker’s voice is loud,place the transmitter on
the upper part of the chest. The transmitter can be attached through its back
clip.
Note:
Placement of the transmitter In different positions will result In recorded
sound volume fluctuations. Avoid any obstructions of the transmitter during
recording. It is recommended to use the furry windshield to prevent audio
interference when using the transmitter outdoors.
Product Operations
Connecting the Receiver to an iPhone
- Connect the receiver to an iPhone using a Type-C to Lightning cable.
- Open the recorder or camera app on the mobile phone to start recording.
Connecting the Receiver to an Android Phone
-
Connect the receiver to an Android phone with a
Type-C interface using a Type-C to Type-C cable. -
Open the recorder or camera app on the mobile phone to start recording.
Note: It is recommended to use the original Type-C to Lightning and Type-C to Type-C cables. Otherwise, compatibility issues may occur, which could result in sound distortion or others.
Connecting the Receiver to a Camera
- Attach the receiver to a camera via the hot shoe or cold shoe using the back clip.
- Connect the 3.5mm audio output interface on the receiver to the 3.5mm audio input interface on the camera using a 3.5mm TRS to 3.5mm TRS cable.
- Set the recording volume of the camera to the lowest and the output volume of the receiver to the medium to ensure the best recording level.
Charging and Storage
- If the transmitter or receiver battery indicator light turns red, please charge the transmitter or receiver by placing it in the charging case or via the Type-C port.
2. It is always recommended to place the transmitter and the receiver in the charging case for charging and storage after each use.
Specification Parameter
Transmitter Host (TX)
Parameters
Transmitter (TX)
- Audio Sampling Rate: 24Bit 4BKHz
- Frequency Response: 50Hz-15KHz
- Signal-to-noise Ratio: greater than 68dB
- Distortion THO: less than 0.1 %
- Sound Delay: 26mS
- Working Current: 3. 7V 24mA
- Quiescent Current (Shutdown Current): less than 10uA
- Noise Reduction Intensity: 30d8
- Distance: forward=50 meters .. backward >30 meters
Receiver Host (RX)
Parameters
Receiver (RX)
- Audio Sampling Rate: 24Bit 48KHz
- Frequency Response: 50Hz-15KHz
- Signal-to-noise Ratio: greater than 68dB
- Distortion THD: less than 0.1 %
- Sound Delay: 26mS
- Working Current: 3.7V 54mA
- Quiescent Current (shutdown current): less than 10uA
- Noise Reduction Intensity: 30dB
- Distance: forward=SO meters , fackward >30 meters
Product Instruction
Charging Case
- Charging case battery indicator light
- Type-C charging port
- Microphone charging compartment
- Receiver charging compartment
- Microphone charging compartment
Transmitter (TX)
- Powerbutton
- Noise reduction switch
- Reverb switch
- Microphone recording port
- Headphone Jack
- Type·C charging port
- Charging Indicator light
- Connection indicator light
- Reverberation indicator light
- Noise reduction indicator light
- Silentindicatorlight
Receiver (RX)
Transmitter Function (TX)
Receiver Function (RX)
Packing List
Packing list Contents
- Transmitter•2
- Type-C Receiver
- Charging Case
- 1 USB to 2 Type-C Cable
- Type-C to Lightning Adapter Cable
- Type-C to Type-C Adapter Cable
- 3.5mm TRS Cable
- 3.5mm TRRS Cable
- Headphones•2
- Furry Windshield•2
- Warranty Card
- User Manual
Some accessories may vary depending on the different versions
Use Procedure
Caring For Your GRENARO Product
- Please keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
- Use only a soft and dry cloth for cleaning the product.
- Malfunction may be caused by dropping, impact of external force.
- Do not attempt to disassemble the product. Doing so voids warranty.
- Please have the product checked or repaired by authorized technicians if any malfunctions happened.
- Failure to follow all the instructions may result in mechanics damage.
- Warranty does not apply to human errors.
MADE IN CHINA
Read More About This Manual & Download PDF: