GRENARO S11-Pro Digital Display Wireless Microphone with Charging Case User Manual
- June 14, 2024
- GRENARO
Table of Contents
GRENARO S11-Pro Digital Display Wireless Microphone with Charging Case User
Manual
Product Overview
Single Channel
Dual Channel
Introduction
‘Thanks for choosing our product.
“This product is a smart wireless microphone that provides professional-grade
recording output. Plug and play, no app required. Multple uses: It can be used
in oniine live broadast, video Viog shooting, program interview, recording,
video teaching and other occasions.
“This product consists of three parts: charging box, microphone transmitting
end and receiving end. (As shown in the figure below, some models have no
charging box, subject to the real object)
Microphone transmitter
Type-C receiver
ID Diagram
- Windproof net
- Microphone Connection Indicator
- Microphone Type-C Charging Port
- Microphone clip
- Switch Key
- Type-C Port to Connect Phone
- Receiver indicator
- Receiver charging port
- Charging box Type-c charging port
- Remaining Power LED Display of The Charging Compartment
- Reverberation indicator
- Battery indicator
- Mute indicator
How to use
Step 1: Connect the receiver to phone with port.
Note: Oppol vivli gooier aimed brand mobile phones, f e connection s
unsuccessful please go 1 the satings, searching “OTG” – urn on OTG power
supply
Step 2: Press switch key of microphone, the indicator light tums green,
and then power is turned on.
Step 3: The indicator red light of receiver keeps always on. then open
the phone camera, live App or other Apps, and then to use the microphone to
receive sound. 
Special Note:
For the use of port: there is no battery in receiver, and no need to recharge
during live. If the phone is low power during Live, it can be recharged
directly through Type-C port.
About Ul
Microphone Transmitter
| Function | Button | LED |
|---|---|---|
| Power on | Button 3S start up | Battery indicator light always on, connectiom |
indicator flashing green light
Power off| Press 3S shut down| All the lights went out
Unconnected Search pairing| Automatically enter the pairing| Connectiom
indicator flashing green light
Connected| | Green light always on
Switch the noise reduction Ievel| Press the key to switch cycleup to 3 levels
, cycle in turn| Level1: Connection indicator light flashes once Level2:
Connection indicator light flashes twice Level3: Connection indicator light
blinks 3 times
Reverberation| Three-click button to switch reverberation, default is not on,
need to turn on manually,three clicks again to exit reverberation| When
opened, reverberation light is turned on; if closed, reverberation light will
be turned off.
Silent mode| Mute Double click to mute the MIC and then double click again to
restore the radio status| Turn on mute indicator Turn off Mute indicator off
Electricity display| | Battery RGY tricolor light power: 40-100% green light,
Power: 20-40% yellow light,10-20% red light, Power: below 10% the red light
flashes
Charging display| Using a Type-C Charging Cable| Charge level between 10-20%:
Battery indicator light displayed red; 20-99% Displayed yellow; 100%:
Displayed green.
Low battery| | Low power indicator Blinks every 10 seconds. The green light
went out.
Receiver
| Function | LED | |
|---|---|---|
| Power on | Automatically power on after plugging in the mobile phone port | The |
light blinks
Power off| Automatic shutdown after unplugging|
Unconnected| | The light blinks
Connected| | light is always on
Packing List
Content of packing
- Microphone transmitter
- Lightning receiver
- Charging box
- Charging cable.
- User manual
Certificate
QC PASS
Brand: Grenaro
QC PASS | Email : Grenaro@outlook.com
References
Pages: 1 2