BOSCH BHU3600 Kiox 300 eBike Display Instruction Manual
- June 8, 2024
- Bosch
Table of Contents
BOSCH BHU3600 Kiox 300 eBike Display
Safety instructions
Read all the safety information and instructions. Failure to observe the
safety information and follow instructions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
-
Do not attempt to secure the display or operating unit while riding.
-
Do not allow yourself to be distracted by the on-board computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your on-board computer other
than switching the assistance level, stop and enter the appropriate data. -
Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
-
Do not open the on-board computer. Opening the onboard computer may damage it beyond repair and void any warranty claims.
-
Do not use the on-board computer as a handle. Lifting the eBike up by the on-board computer can cause irreparable damage to the on-board computer.
-
Do not stand your bicycle upside down on its saddle and handlebars if the on-board computer or its holder protrude from the handlebars. This may irreparably damage the on-board computer or the holder. Also remove the on-board computer before placing the bicycle on a wall mount to ensure that the on-board computer does not fall off or become damaged.
Privacy notice
If the on-board computer is sent to Bosch Service because it requires servicing, the data stored on the on-board computer may be transmitted to Bosch.
Product description and specifications
Intended use
The Kiox 300 on-board computer is designed to display cycling data.
To access the full functionality of the Kiox 300 on-board computer, you will
need a compatible smartphone installed with the eBike Flow app (available from
the Apple App Store or the Google Play Store).
Product features
The numbering of the components shown refers to the illustrations on the
graphics pages at the beginning of the manual.
- Display
- Front cable outlet
- Rear cable outlet
- Removal blocker
- Snap-in hook
- Adapter tray
- Display contacts
- Holder contacts
- Display mount
- Display mount fastening screw
- Bridge for retaining strap
Technical data
On-board computer
| Kiox 300
---|---
Product code| |
BHU3600
Operating temperature A)
| °C|
−5 to +40
Storage temperature
| °C|
+10 to +40
Protection rating
| | IP54
Weight, approx.| g|
32
A) Temperatures outside of this range may cause faults in the display.
Assembly
Inserting and Removing the Display (see figure A)
To fit the display (1), attach the display (1) to the front edge of the
display mount (9) in the direction of travel, on the snap-in hook (5) ❶ and
press the rear side of the display (1) on the display mount (9) ❷. To remove
the display (1), pull the display (1) towards you
❶ until you are able to lift off the display (1) ❷. A retaining strap can be
secured to the bridge (11).
Inserting the Removal Blocker (see figure B)
Insert the removal blocker (4) into the adapter tray (6) from below until you
hear the removal blocker (4) click into place.
From this point onwards, you can no longer lift off the display (1) from the
display fixture (9) without removing the display mount (9) from the adapter
tray (6) by loosening the two fastening screws (10).
Note: The removal blocker (4) is not an anti-theft device.
Operation
The displays are operated and the indicators are controlled via a control
unit.
The meaning of the buttons on the operating unit for the display indicators
can be found in the following overview. Depending on how long it is pressed
for, the select button has two functions.
Scroll to the left
Scroll to the right
Scroll up
Scroll down
Change to the second page level (press briefly)
Open page-related options (e.g. )
Open the settings menu (Press and hold > 1 s)
Start page
If you did not select another page before the last time you switched off, you will be shown this page.
a Battery charge
b Assistance level
c Bicycle lights
i Unit of speed indicator
j Indicator name
k Your performance
l Speed
m Motor output
The a … c indicators form the status bar and are shown on every page.
You can use the button to change from this page to the status page or press
the button to access additional pages. Your statistical data, the battery
range and the average values are displayed on these pages. From each of these
pages, you can access the second level of data by pressing the button.
If the user is on a different page to the start page when they switch off, the
most recently displayed page will appear again when the bike is switched on.
Pressing and holding the select button enables you to reset the statistical
data for your journey or excursion (not on the page).
Status page
From the start page, you can access the status page by pressing the button.
a Battery charge
b Assistance level
c Bicycle lights
d Time
e Connection indicator
f Smartphone connection
g Settings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding. The settings menu contains the following menu items:
-
< My eBike >
You can find the following menu items here. -
< Range reset >
The value for the range can be reset here -
< Auto trip reset>
The settings for automatic reset can be adjusted here. -
< Wheel circumf.>
The value of the wheel circumference can be adjusted or reset to the standard setting here. -
< Components>
The components used with their version numbers are displayed here. -
–
You can find the following menu items here. -
< language>
You can select your preferred system language here. -
< Units>
You can choose between metric or imperial measurements here. -
< Time>
You can set the time here. -
< Time format>
You can select one of the two time formats here. -
< Brightness>
You can set the display brightness here. -
< Settings reset>
You can reset all of the system settings to the default values here. -
Under the < Information> menu item, you will find the contact details (
) and certificates ().
You can leave the settings menu by pressing the button.
Press the button to access the start page.
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurised water.
Keep the screen of your on-board computer clean. Dirt can cause faulty
brightness detection.
Clean your on-board computer using a soft cloth dampened only with water. Do
not use cleaning products of any kind.
Have your bake system checked by an expert at least once a year (including
mechanical parts, up-to-datedness of system software).
In addition, the bicycle dealer may base the service date on the distance
travelled and/or on a period of time. In this case, the on-board computer
displays a message telling you when the service date is due each time it is
switched on.
Please have your bake serviced and repaired by an authorized bicycle dealer.
Have all repairs performed only by an authorized bike dealer.
After-sales service and advice on using products
If you have any questions about the bake system and its components, contact an
authorised bicycle dealer.
For contact details of authorised bike dealerships, please visit www.bosch
ebike.com.
Transport
- If you transport your bake attached to the outside of your car, e.g. on a bike rack, remove the on-board computer and the bake battery to avoid damaging them.
Disposal
The drive unit, on-board computer incl. operating unit, battery, speed sensor, accessories and packaging should be disposed of in an environmentally correct manner.
Do not dispose of beaks and their components with household waste.
In accordance with Directive 2012/19/EU and Directive 2006/66/EC respectively, electronic devices that are no longer usable and defective/drained batteries must be collected separately and recycled in an environmentally friendly manner.
Please return Bosch bake components that are no longer usable to an authorised
bicycle dealer.
Subject to change without notice.
Documents / Resources
|
BOSCH BHU3600 Kiox 300 eBike
Display
[pdf] Instruction Manual
BHU3600 Kiox 300 eBike Display, BHU3600, Kiox 300 eBike Display, eBike
Display, Display
---|---