SMART Living Flamman Manual
- June 8, 2024
- FLAMMAN
Table of Contents
User Manual
SMART Living Flamman
Thank you for choosing a Smart Living product.
To ensure proper operation, read this manual carefully before use.
START THE FLAME
To start the FLAME, press and hold the button which is marked with for about 2 seconds.
When you hear “ BLUETOOTH MODE ” from the speaker it is started and ready to be connected with the desired device.
PAIR YOUR DEVICE
When the FLAME is started, it is in Bluetooth mode. Go into the Bluetooth
settings of your device (e.g. cell phone ) and select SMART LIVING.
(See the troubleshooting if it doesn´t work.) If you have previously connected
your device to the FLAME, it will connect again automatically.
CONTROL THE LIGHT
When you turn on your speaker, the light will also start automatically.
When in this mode you can choose how you want the light to ”flame” by pressing the button in the middle with the lamp icon once. Also press that button if you want to switch off the light and only have the sound on.
START THE LIGHT WITHOUT SPEAKERS
If you just want to turn on the light without having sound turned on, press the button in the middle for about 2 seconds.
In this mode it is not possible to change between the different light settings.
CHANGE TRACK
To change the track on the FLAME, press PLUS once to step forward or MINUS once to go back. Of course, you can also change the track on the unit connected to the FLAME.
CHANGE VOLUME
To increase or decrease the volume of the FLAME, press and hold PLUS or MINUS. You can also increase and decrease the volume on the connected device.
Keep in mind that if the volume is low on the connected device , you cannot get the sound higher on the FLAME. You must first increase the sound on the connected device.
CONNECT TWO SPEAKERS WITH TWS
If you have two FLAME speakers and want them to play the same music, it is easy to pair thanks to the TWS feature.Start one of the speakers in BLUETOOTH mode and then do the same with the other speaker. Now these two speakers will be connected with each other and a sound will be heard.
( NOTE: Make sure your cell phone or similar is not connected first.)
Then you go into your cell phone or device, just like when you connect to a speaker, and select one of the devices called ” SMART LIVING”. When you are connected to SMART LIVING, your music will be played on both speakers.
TROUBLESHOOTING
CHARGING & SD CARD
CHARGING
Plug the supplied cable into the back of your speaker. You will find the input
under the lid.
PLAY MUSIC FROM SD CARD
On the back of the unit there is a slot for SD CARDS. When a card is plugged
in, the music starts playing. Change song/volume etc like usual.
Specification
LTC reserve the right to improve as well as change specifications and performance without special notice.
LTC LEJON TRADING CO AB – Hortensiagatan 4 – 256 68 Helsingborg – Sweden
+46 42225170- [email protected] – MADE IN CHINA
Read More About This Manual & Download PDF:
SMART Living Flamman Manual – Download [optimized]
SMART Living Flamman Manual – Download
Questions about your Manual? Post in the comments!