LEMFO Smart Band User Guide
- June 7, 2024
- LEMFO
Table of Contents
Smart Band User Guide
Instruction
1. Basic Layout
2. Charging the Device
Please charge the device before use the smart bracelet. The machine adopts USB
charging, and it needs to pull out the watchband with buckle said, expose the
charging head, and then insert the charging head in the correct direction into
the USB charger or computer USB port.
Charger: Voltage 5V
Charge time: about1.5-2 hours
3. Function
3.1 Main interface
After the device has been connected via Bluetooth successfully with your
phone, the time will auto synchronize correctly with your phone.
3.2 Pedometer / Distance/ Calories
3.3 Heart Rate Monitor
Cycle through to the heart rate page then get start, and the heart rate icon
will flicker, it will be better to wear the smart bracelet on your left hand,
1.5cm after the styloid process of the ulna, and please make sure the heart
rate sensor close to your skin. On App there will show your heart rate data
every 30 minutes tested or others you sets by device automatically.
3.4 Blood Pressure Monitor
Pressing the touch button turns to the blood pressure screen get start. And
the icon will flicker (please stay still when test the blood pressure) if you
need save the data of test result, please operate this function by APP. Manual
start this function on the device the data will not save on the APP
3.4 SpO2 Monitor
3.5 Sleeping Monitor
Device will monitor sleeping data automatically, please check the sleeping
detail data on APP dashboard.
When the bracelet is turned on, sleep is turned on by default. The sleep
monitoring period was 22:00 p.m. to 08:00 a.m., the end of the bracelet
displayed sleep data, and the sleep data generated that night, Connect to
Bluetooth real-time to the phone’s APK (note: synchronization precondition:
APK to bind the bracelet).
3.6 Sports
3.7 News
3.8 More
Long press touch button, can enter the second level to perform related
functions.
4. Bluetooth Paring
1. Turn on the smart bracelet.
2. Turn on your smartphone’s wi-fi capability, scan the qr code below to
download the “FunDo” APP or search for “FunDo” downloads in GooglePlay or
apple’s APP Store.
3. Download “FunDo” APP and run it.
4. After the installation is completed, in the “more”/ “+ add device”, select
the corresponding Bluetooth name from the list (for example: QW18), and click
it connect to the corresponding bracelet. The time、 date、 language (many
language may not be supported) will automatically synchronize the mobile phone
system.
4.1 Bluetooth Remove
1. Delete the Bluetooth on the APP
2. Turn off the APP on the smartphone
3. Remove the Bluetooth on the setting of the smartphone
4.2 Bluetooth automatic reconnect
When the bracelet reaches the Bluetooth connection range, it will
automatically reconnect the bracelet.
5. How to use APP
After install Fundo APP, you may required to fill your personal information
such as gender、weight etc. Then please connect smart bracelet via Bluetooth
(Please refer to the Bluetooth Paring Steps)
After a successful connection between the bracelet and the mobile APP, the
movement data will be synchronized automatically.
Fundo APP can also be used separately from the bracelet. As an application of
mobile phones, it can realize data collection of various sports modes. The
mobile phone location service (such as GPS) can be opened in the movement, and
the real-time display of motion trajectory can be realized.
5.1 Sports:
Tap to check Steps Distance/Calorie data etc.
5.2 Steps、Sleep、Heart、BP、SpO2
These five modes need to connect the bracelet to complete the data collection
and synchronize to the mobile APP in real-time. Show below:
5.3 Analysis and Report
Sports data can be shared with friends by clicking the icon at the top right
corner.
5.4 “More”—settings
The following functions can only be realized under the premise that the mobile
APP is successful.
◯ Notifications Function
Include call notification, SMS notification, application message push such as
QQ message push, “WeChat message” push, and other functions.
◯ Take a photo
You can use the bracelet to control your phone to take a photo
◯ Find Device: The bracelet will be vibrate and bright screen.
◯ Sedentary and drinking water remind
Turn on this function，set the monitoring period, the bracelet can remind you
to drink water or sport at regular intervals during the prescribed time.
◯Remind Mode
It is three modes for you select:
Vibration、 Bright screen、Bright screen +Vibration
◯ Alarm clock remind
◯ Raise hand
Turn on this function, when you lifting a hand to tilt the bracelet inward,
facing the wearer straight ahead, the bracelet automatically bright screen.
◯ Heart rate test
Open heart rate detection sets the detection time period, the bracelet can
detect the heart rate within the specified time.
◯ Do not disturb mode
After you open the “do not disturb mode”, except the alarm clock, all
notifications in the Settings are not reminded, and the bracelet will no
longer have automatic bright screen vibration reminder.
◯ About
Check the APP version, and the user can check for new version updates also
Specification
Chip: BK3431Q
Display: LCD TFT 0.96
Battery: 90mAh
Waterproof: IP68
Standby time: 7 days
Support system: IOS 8.0 or above, Android 4.4 or above
Heart rate monitor: support
Blood pressure: support
Auto screen light: support
Bluetooth: BLE 4.0
Remark:
Why Bluetooth disconnected and incoming calls and messages do no remind:
1. Please keep APP and smart bracelet both turn on.
2. Please keep your smartphone and smart bracelet within 8 meters.
3. There is some smartphone, will turn off APP automatically in order to save
power. In this case, please set your phone on Mobile Manger or security center
accordingly to allow APP turn on always.
4. Turn off the power-saving mode.
5. When you have these problems, and not know how to set，please ask for
services online.
Note This device not for medical use, test data just for reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>