Hydro CRUNCH 315W CMH COMPLETE GROW LIGHT SYSTEM [120-240V] User Manual
- June 7, 2024
- Hydro CRUNCH
Table of Contents
- Introduction
- Information and Specifications:
- Environment
- Certifications
- Safety Recommendations and Warnings
- Installing the fixture
- Fixture use
- Daisy Chainable Feature
- Placement and Replacement of the Lamp
- Placement and Replacement of the Reflector
- Inspection, Maintenance and Repair
- Storage and Disposal
- More other voltage items to consider.
- More reflector styles to consider.
- IMPORTANT PRODUCT INFORMATION
- WARNINGS AND INSTRUCTIONS
- 2 Year Limited Warranty Service
- RETURN FORM
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Hydro CRUNCH 315W CMH COMPLETE GROW LIGHT SYSTEM [120-240V] User Manual
Introduction
Thank you for purchasing our 315W CMH COMPLETE GROW LIGHT SYSTEM. This manual describes the mounting and installing of the fixture and also describes how to use the fixture. Mounting and installing of the fixture may only be executed by certified service personal. Please read and understand this manual completely before using the fixture. Only use the fixture as specified in this manual.
Information and Specifications:
The 315W CMH COMPLETE GROW LIGHT SYSTEM is an electronic horticulture fixture. It is designed to drive the professional 315W CMH/CDM/LEC lamp. Professional electronic lamps operate at square wave low frequency to optimize lamp life.
In this manual, the 315W CMH COMPLETE GROW LIGHT SYSTEM will be referred to as: “the fixture”
Environment
The fixture is meant for use in climate rooms. The fixture may be used in damp environments. The fixture may not be used in wet environments or outdoors.
Certifications
UL Certified
Safety Recommendations and Warnings
Warning!
Carefully read the warnings below before using or working with the fixture!
Installing the fixture
Fixture use
Warning! Never use the fixture without a lamp or reflector
Daisy Chainable Feature
Placement and Replacement of the Lamp
Placement and Replacement of the Reflector
Inspection, Maintenance and Repair
Storage and Disposal
More other voltage items to consider.
[240V], [277V] If you are interested in other voltage, please contact us for more information.
More reflector styles to consider.
If you are interested in other reflector style, please contact us for more information.
IMPORTANT PRODUCT INFORMATION
READ IMMEDIATELY
SAFETY FIRST!
Failure to observe the following safety warnings may result in serious injury
or death. Use all products only as directed. Failure to observe these safety
warnings will result in a waiver of any and all liability on the part of its
manufacturer, and resellers, and will void all warranties to the extent
permitted by law.
WARNINGS AND INSTRUCTIONS
FOR USE:
2 Year Limited Warranty Service
If the product will not work after you have read the troubleshooting guide and practiced the troubleshooting options, you are advised to return the light system to the retailer you purchased it from. The dealer will be able to examine the light and test its components. If they are not able to repair the light, they will return it to us for examination and repair/replacement. Do not attempt to repair any product on your own, as serious injury or death may result. If the retailer is not able to help you and the light is still under manufacturer’s warranty, you may contact us for technical support. In some cases, you will be issued an RMA# (return merchandise authorization number) to return the unit for factory repair. Complete the warranty form below and return the light with all original packaging, your receipt of purchase, and a valid RMA# to the address below. Please pack and ship the light in its original packaging. If it is damaged in shipment we cannot be responsible and the warranty may be voided. Once we receive RMA package, it will be repaired or replaced and shipped back to you. Please note if an additional warranty was purchased and include the extended warranty sales receipt with your return.
RETURN FORM
Include the following if returning:
- Proof of Purchase
- This completed form
- RMA# on the outside of the box
- Extended Warranty Receipt
Return Merchandise Authorization Number (Required):
Contact Name:
Address:
Phone #:
Email Address:
Please give a brief description of your technical issue:
Send To:
Hydro Crunch
17128 Colima Road Suit 510
Hacienda Heights, CA 91745
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>