dogtra Dog Training System Instruction Manual
- June 7, 2024
- Dogtra
Table of Contents
- Instruction Manual
- 113R Remote Training Kit Contents
- Features:
- The Barkmate 113R Receiver Collar
- On/Off Button – change operating mode
- Switch between Fence Collar only mode or Dog Training Collar mode
- The Barkmate Remote Training Transmitter
- Stimulation Level Adjustment Button
- Transmitter Charging
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Instruction Manual
dogtra Dog Training System
113R Remote Training Kit Contents
- Remote Trainer Transmitter
- 113R Receiver Collar (Medium to Large Size Dogs)
- 113R Collar and Remote Transmitter Charger
- 1 Pair of Long Contact Probes for long hair dog
Features:
- Up to 800 metres range
- Expandable to control 3 dogs (with purchasing extra collar)
- Waterproof (IPx7)
- Tone, Vibration and 10 variable levels in both continuous and nick stimulation
- Transmitter and collar are rechargeable with 3 hours quick charge
- Easy to use, comfortable and ergonomic transmitter
- Battery indicator
The Barkmate 113R Receiver Collar
The Standard Barkmate 113R Receiver Collar can be used for Barkmate Dog Fence system as well as Barkmate Remote Dog Training System. This collar has two operating mode which are Dog Fence Mode and Dog Training Collar Mode. Please make sure the collar is in Dog Training Collar mode before using.
On/Off Button – change operating mode
Press and hold on 4 seconds to turn the collar on. The Collar will beep twice rapidly, and the green LED light will flash once every 5 seconds. Press and hold on 4 seconds to turn the collar off. The collar emits a long beep, and the LED light will turn off. NOTE: when turning the collar off, it is very IMPORTANT to release the button after the LONG BEEP, or the collar will go into pairing mode. It will lose the connection with the OPTIONAL remote transmitter.
Switch between Fence Collar only mode or Dog Training Collar mode
Fence Collar only mode: Containment only, LED flashes Green twice every 5
seconds
Dog Training Collar mode: Remote training activated, LED flashes Green once
per 5 seconds
Change the operating mode when the collar is ON! Press and hold the ON/OFF
button while the collar is on for 2 seconds, the LED will turn Red. Release
the Button immediately, the Green light will flash either once or twice to
indicate the current operating mode. Twice every 5 second is the Fence only
Mode and once every 5 second is the Dog Training Mode. To change the mode,
repeat the step. If the ON/OFF button has been pressed too long, the collar
will be turned off and you will hear a long beep.
The 113R collar has 3-hour fast charge battery. The LED will flash Red when it needs to charge, and Green means fully charged.
The Barkmate Remote Training Transmitter
Stimulation Level Adjustment Button
The ON/OFF Button
Hold the button for 2 seconds to turn it on. The LED indicator turn Blue then off, and the LCD should show default “A01. To switch the power off, hold this button for 2 seconds and the power light indicator will switch off.
The Dog Selector Buttons
The Transmitter is able to train up to 3 dogs up to 800 metres line of sight.
The default is in “1”. The LCD screen will display dog ID “A XX”. Press “2”
button to switch to dog 2. The LCD will display “BXX”. Press 3 to switch to
dog 3. And the LCD will display “C XX”. A = Dog 1; B = Dog 2; C = Dog 3; “XX”
= The output level for static correction & vibration.
Please Note: The LED flashes Red when the battery is low.
The Barkmate Training remote is able to control up to 3 collars. You may need to unpair the collar before you can pair it with the new remote as the collar may be paired with a different remote for testing purpose from the factory. MAKE SURE the collar is in dog training mode (flashes GREEN once every 5 seconds).
Unpairing the new collar/remove coding
Pair the new collar to the remote
Transmitter Charging
The transmitter has 2-hour fast charge lithium battery. When the Transmitter is plugged in with DC power supply, the LCD will display “CHA”. This means the device is charging. The LCD will display “FUL” when the transmitter is fully charged.
Troubleshooting
The Dog Does not respond to stimulation
- Check if the collar is fitted properly
- For long/thick hair dog, trim the hair of the contact area. Use the long contact probes, must make good contact with skin.
- Recharge the battery/replace new battery of the collar, test the output with the collar test light tool. The collar will still beep with low battery but it would not emit the strength of stimulation.
If the signal is not consistent, please contact DogMaster Trainers Support Line: AU: 07 5559 9100, NZ: (07) 855 4799.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>