Winstar C02A17A13C03 Wireless Charging Phone Holder User Manual
- June 8, 2024
- Winstar
Table of Contents
Winstar C02A17A13C03 Wireless Charging Phone Holder
Product Specifications
- Dimensions: 180mm x 100mm
- Input Voltage: 9V
- Supports Quick Wireless Charging
- Maximum Charging Power: 15W
- Compatible with USB QC2.0/QC3.0 standard chargers
Installation Steps
- Tear off the plastic cover
- Stick the mount steadily to a suitable position
- Plug in the power cable
Wireless Charging Instructions
- Remove the transparent film on the bottom of the wireless charger and stick it in a suitable position.
- If the car temperature is high, turn on the air conditioner anduse wireless charging after the car temperature decreases.
- To achieve wireless fast charging, use a USB QC2.0/QC3.0 standard charger and a 2A current charging cable.
- Place the phone in the center of the wireless charger for charging.
- For sideways charging only. Not compatible with mobile phone cases thicker than 5mm or 3D-shaped cases.
- If wireless charging fails, check that the power charger is correctly installed and the cable is not damaged.
FAQ
-
Q: Can I use any charger for this wireless charger?
A: To achieve fast wireless charging, ensure to use a USB QC2.0/QC3.0 standard charger with a 2A current charging cable. -
Q: My phone is not charging wirelessly, what should I do?
A: If wireless charging fails, check that the power charger is correctly installed and the cable is not damaged. -
Q: Can I charge my phone with a thick phone case on?
A: The wireless charger does not support mobile phone cases thicker than 5mm or 3D-shaped cases. It is recommended to remove the phone case for efficient charging.
OVERVIEW
Note
USB_QC2.0/QC3.0 Input Voltage is 9V,support the quick wireless charging
Installation
- Tear off the plastic cover
- Stick the mount steady
- Plug the power cable
- Wireless Charge cellphone
INSTRUCTION
- Remove the transparent film on the bottom of the wireless charger, and stick in a suitable position
- If the temperature in the car is high, please turn on the air conditioner and use wireless charging after the temperature in the car decreases. Note: In a high-temperature environment, the high temperature of the mobile phone will affect the charging efficiency.
- To achieve a wireless fast charging function, make sure to use USB QC2.0/QC3.0 standard and a 2A current charging cable. The maximum charging power is 15W
- The phone can be charged by placing it in the center of the wireless charger.
- Sideways charging only. It does not support the charging of mobile phone cases with thicknesses greater than 5mm and 3d shaped mobile phone cases. Note; Remove phone case can improve wireless charging efficiency
- When failing to use a wireless charger, check power charger is fully installed and the cable is not damaged.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm the radiator your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>