panacom C100 Mobility Sound Car Stereo User Manual
- June 7, 2024
- panacom
Table of Contents
CA-5100
USER MANUAL
CA-5100 CAR AUDIO
User’s Guide
Thank you for purchasing CA-5100 Panacom’s Car Audio.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
Double USB
LCD display
Digital FM Radio
Support MP5/MP4/MP3/WMA
Electronic audio control
TF card
Digital clock
AUX-in
4.0 inch TFT Display
Video output & input
Charge up mobile
Remote Control
50Wx4 max output four channel
1. WIRELESS BT CONNECTION
Under the state of power on, it will automatically enter the state of matching or searching state. search the Wireless BT’s name “CAR-BT” (password is 0000) then Connected it to the unit. If your phone has connected before, then it will automatically connect between the unit and the phone when your phone turn on the function of Wireless BT and the unit is power on. It is no need to connect it again. The products Wireless BT just can connect with one model phone on the same time If It will to connect to the other phone, then it has to disconnect the connecting phone.
2. DIRECTLY TALK VIA WIRELESS BT
Marking calls
After connect to the Wireless BT, make the calls on the phone directly. Answer
the phone calls. The unit has the bell ring when coming calls. Press the
BND/AMS button to answer the phone calls or answer it on the phone directly
hang out the calls. When you are making calls, press the “MOD” button to hang
up the calls or hang It up on the phone directly.
3. PLAY THE MUSIC BY WIRELESS BT
After finish to connect to the Wireless BT, press the MOD button to change to the state of “BT”, and then start the music player on the phone to play the music.
PANEL KEYS DESCRIPTION
1. Power button/Mode button
In the stand by state, short press or long press to power on Under the state
of power on short press the volume knob to exchange the Radio, AUX, Wireless
BT, USB, SD function, Long press to turn off. (Note: Wireless BT, USB, SD
function is unavailable unless there is a relevant device).
2. Main menu:
Under any state, short press to enter the state of main menu. It can through
the volume knob or short press the button of previous or next song selection.
Radio-USB/SD-AUX IN—system setting-Wireless BT. Then press the SEL button to
enter this state.
(Note: The Wireless BT function need to connect to the phone and change to the
Wireless BT main interface.)
3. SEL: Short press volume knob to exchange the function of select
BAS/TRE/BAL/FAD/EQ/LOUD/VOL/Intensity control/chrominance adjustment/
saturation control to exchange.
Then rotary the volume knob to adjust the figure and change the function.
Under any state, long press to enter the main menu function.
VOL:00-40
BAS:-15-00-15
TRE:15-00-15
BAL: L15-00-R15
FAD:R15-00-F15
EQ: OFF/CLASS/ROCK/POP/FLAT
LOUD: OFF/ON
luminance: 01-50–100
Chromaticity: 01-50-100
Saturability: 01-50-100
4. BAND/AMS (Noted: AM is optional)
Under the state of USB/SD/AUX, short press to exchange the audio-video—picture
display state. In the video display, long press this button is the output
video function. At this time, the units display will turn to black. Press
again of this button, exchange to the small display. Under the state of radio,
short press to change the band function, this exchange between FM1. FM2 FM3.
AM1AM2. Under the state of radio state, long press to auto search station.
When it got the radio, it will store in the FM1, FM2. FM3 AM1, AM2. Each band
can save six stations. Total it can save FM18 stations and AM 12 stations.
5. RESET:
Press this key to restart the device.
6. :
In audio status, press it to go previous, in menu status, press it to go left
or upward.
In radio status, press it to search previous stations, and stop search after
it found stations; press and hold and then press to adjust the frequency. In
video status, press and hold to fast re-wind, it will quit fast rewind
function if no operation.
7. :
In audio status, press it to go next, in menu status, press it to go right or
downward.
In radio status, press it to search next stations, and stop search after it
found
stations: press and hold and then press to adjust the frequency.
In video status, press and hold to fast forward, it will quit fast forward
function if no operation.
8. Remote reception window
9. Display window
10. AUX- IN interface
11. TF Card Slot
12. USB Interface
13. Mute( MUT key)
In power-on status, press MUT key to mute the sound, the display will flash
MUT press MUT key to resume the sound.
14. MIC
15. EO: OFF/CLASS/ROCK/FLAT
16. For Phone charging
17. CH-: In radio status, press “ch-” key to play the previous preset station
18. CH+: In radio status, press “CH+” key to play the next preset station.
MENU
Main menu
Radio interface
Audio interface
Wireless BT interface
REMOTE CONTROL INDICATION
- Short press to turn on/off the unit
- Enter the state to dial the numbers, press(0-9 to dial the number) Press this button to make the phone calls. In the state of Wireless BT interface, short press this button to show the last number, press for one time to redial this number.
- In the state of dial the numbers, short press to delete the number. In the state of making phone calls, short press to hand up the calls.
- After turn on the unit short press for mode exchange. In the state of dial the number or select the song, short press for “0”.
- In the state of radio, short press this button to select the storage station in “1”. In the state of playing music of Wireless BT, short press to pause or play the music. In the state of dial number or select songs, short press or number “1”.
- In the state of radio, short press to select station. In the station of playing music, short press to scan for 10 seconds. In the state of dial number or select songs, short press for number 2
- In the state of radio, short press to select the storage station in 3. In the state of playing music, short press to repeat. In the state of music or select songs, it is for number 3.
- In the state of radio, short press to select the storage station in 4, in the state of music, short press to random. In the state of dial the number or select songs, it is for number “4”
- In the state of radio, short press to select the storage station in 5. In the station of music, short press for -10 songs. In the state of music or select songs, it is for number “5”
- In the state of radio, short press to select the storage station in 6. In the state of music, short press for +10 songs. In the state of dial number or select songs, it is for “6”
- After turn on the device, short press for LOUD In the state of dial the number or select song, it is for 7.
- In the state of radio, short press to scan the station. Long press for scan the station and store the station automatically. Short press to select the songs.
- After turn on the units, short press to select EQ. In the state of dial number or select songs, it is for “9”.
- Short press to increase the volume.
- Short press to decrease the volume.
- In the radio state, short press to change the band. Short press to change the MP3/Video/Picture.
- In the radio station, short press to scan the station. In the state of playing music. short press for previous song. Long press to fast washing out. In the music of Wireless BT, press the number and the store press this button for previous song.
- In the radio state, short press to scan the station. In the music station, short press for next song. Long press to washing out. In the state of Wireless BT music, press the number and for next song.
- In other status, short press for MUTE. In the state of dial numbers, short press for #.
- In the other state, short press to show the time. Long press to set the time. In the state of dial numbers, short press to enter *.
- Short press to set the volume/BAL/FAD/LOUD/EQ etc
SPECIFICATIONS
FM
Frequency Range———————————87.5MH~108MA
Maximum Sensitivitys———————————<=37dBf
Signal to Noise Ratio———————————>=40dB
Stereo Separation————————————->=20dB
MP5
Supported Format–RMVB/RM/FLV/3GP/MPEG/DVIX/XVID/DAT/VOB/AVI
AV Output Horizontal resolution——————-1920X1080P
Music Storage———————————U disk/TF card
Frequency Response———————(100HZ- 10 KHZ)+/-8db
Signal to Noise Ratio———————————>=50dB
Channel Separation————————————>=35dB
Harmonic Distortion————————————–≤5%
Stereo Channel Balance———————————-≤3dB
GENERAL
Voltage———————–DC 12V(see label for specific)
Output Power——————————————-50WX4
Speaker Impedance————————————–4Ω-8Ω
Dimension of Main Frame————-178mm(W)X50mm(H)x98mm(D)
INSTALLATION
- Please read the manual carefully before installation.
- Installation of this product should be done by a suitably qualified person.
- Once all other connections are completed, then connect the unit to the power cables.
- To avoid short circuit, please wrap the exposed cable with insulation tape.
- Tidy all loose cables after installation.
- This unit is designed to work with a 12V (see label for specific) DC negative ground electrical system only. Please ensure your car meets the requirement.
- Please connect the cables according to the colour, Incorrect connection may lead to damage of the unit and the electrical system of the vehicle.
Installation steps
CONNECTION DIAGRAM
A1 White/Black Reversing control
A2 N/A
A3 N/A
A4 Yellow positive pole 12V B+
A5 Blue Auto Antenna control
A6 N/A
A7 Red ignition wire ACC
A8 Black Negative pole GND-
B1 Purple Rear right speaker (positive) RR+
B2 Purple black Rear right speaker (negative) RR-
B3 Gray Front right speaker (positive) FR+
B4 Gray black Front right speaker (negative) FR-
B5 White Front left speaker (positive) FL+
B6 White black Front left speaker (negative) FL-
B7 Green Rear left speaker (positive) RL+
B8 Green black Rear left speaker (negative) RL-
1. Video output
2. Video rearview input
3. Rear left audio output
4. Rear right audio output
5. Radio antenna interface
TROUBLESHOOTING
Power indicator is off
1. The power cord is connected in reverse Correctly connected the power cord.
Check and connect both power cord.
No display
1. Yellow wiring is connected to positive electrode of the battery. > Connect
the yellow wiring to the positive electrode of the battery.
No sound
1. No power
2. Speaker wiring is disconnected
3. No sources in supported format in TF and U disk
4. The edge connector of TF and U disk is dirty lead to poor contact. Connect
the power cord. > Connect the speaker wiring. Check the sources in TF and U
disk. Clean with absolute alcohol.
Sound too low (noise)
1. Internal resistance of power supply is too loud.
2. The antenna cable is loose. > Replace a new power supply. Push the antenna
cable firmly into the plug
Mono only
1. One of the speakers wiring is disconnected.
2. The power amplifier IC is damaged > Connect the speaker wiring.
Replace with a new power amplifier IC.
INTERNATIONAL WARRANTY
Terms and Conditions
- Panacom warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
- This warranty is limited to the repair and/or replacement of this product, according to our own criterion, free of charge within the stipulated term and it does not extend to consequential or incidental damages to other products that may be used with this unit.
- The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of cut in connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
- To make this warranty effective, you shall contact the Authorized Service Center of your country and they shall carry out the pertinent procedure. In order to start the necessary procedure to get said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name and product identification shall be stated clearly.
- Transportation, freight, stay and/or insurance expenses, if any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
Documents / Resources
|
panacom C100 Mobility Sound Car
Stereo
[pdf] User Manual
C100 Mobility Sound Car Stereo, CA-5100
---|---