LOVESEAT ROCKER Instruction Manual
- June 7, 2024
- LOVESEAT
Table of Contents
LOVESEAT ROCKER
General Information & Tips
- To avoid damage, assemble the rocker on a non-abrasive surface such as carpet.
- Make sure all bolts and screws tightly fastened before the rocker is used.
- This rocker is not for commercial use.
Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts and screws.
TOOLS REQUIRED
-
8″ Philips screwdriver (Not provided).
– For tightening all bolts and screws. -
Rubber Mallet (Not provided).
– For tapping in the wooden caps.
Parts & Hardware List
How to Assemble
-
Attach the seat (C), back support (B), apron (D) into right side frame (A 1 ).
-
Next, Attach left side frame (A2) onto the pre-assembled frames, insert four 1 1/4″ bolts (G), as shown.
** DO NOT FULLY TIGHTEN ALL SOL TS YET. -
Invert the chair and repeat step 2 procedure to secure frame.
-
Stand the chair upright. Apply glue (K) to all holes in arms (El & E2) and side frame (Al & A2), as shown. Next, attach right arm (El) and left arm (E2) in side frame holes and tenons, as shown.
-
Insert four 1 1/4″ screws (H) to support (F) and insert 1 3/4″ screws (I) from underneath arms (E1 & E2). Tighten screw using Philips screwdriver.
-
Attach elbow plate (L) to the side frame (Al & A2) dan under seat (C) at front and back seat, secure using 5/8″ screws (M), position as shown.
-
– Make sure all parts are correctly connected and tighten all bolts using screwdriver .
– Tapping in the wooden caps (J) to cover bolts head using rubber mallet.
MAINTENANCE
Wood is a living material that continues to respond to climate condition even
after being made into a piece of furniture.
After assembly rub the furniture with soft rag to remove any residual dust.
Wood is a natural material whose appearance will change when left outdoors.
This product has been treated prior to leaving the factory. To clean, use mild
soap and warm water. Do not use abrasive material, cleansers or bleach
products, Dry thoroughly with soft cloth, Even though this piece of furniture
is extremely durable and long lasting, to prolong life we recommend bringing
it indoors during freezing temperatures. Place it at a shaded area and do not
leave it in standing water or on wet ground.
Do not put hot items directly on furniture surface.
Do not store furniture in areas that have central heating or cooling vents to
prevent excessive drying of the wood. This will decrease the furniture’s
longevity.
Do not write on furniture without a padded barrier to protect the surface .
In order to maintain the product’s durability, please read carefully.
Do not leave your furniture in puddles of water or on wet ground.
Cover your furniture during winter months or move into covered storage, if in
wet climates.
The manufacturer supports protection of the world’s forest resources and is
diligent is sourcing legally harvested wood.
1 year Limited Warranty
The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer.
-
1 year limited frame warranty
Frames are warranted to be free :from defects in material and workmanship. Fading or discoloring caused by putting the product under sunlight or rain is not covered by this limited warranty. Damage to the frame due to improper assembly or exposure to water and sub-freezing temperatures is not covered. ( Do NOT allow water to accumulate inside frame ) -
Finish
The finish is warranted against peeling, cracking, or blistering for a period of 1 year, provided the unit has not been scratched or abraded. Scratches and chips resulting from normal wear and use are not covered. Peeling resulting from exposure to elements is not covered.
Warranty Exclusions: Furniture used for commercial, contractor or any non-
residential purposes, clearance items, display models or items purchased “as
is”, freight damage, furniture damaged by acts of nature, vandalism, fire,
abuse, lack of proper care and maintenance, or improper assembly, straps and
fabric against fading or discoloration from exposure to elements, oil spills,
fluids or chemicals; glass against breakage; hardware against corrosion or
rusting; buckling or splitting of tubing resulting from exposure to water and
freezing temperatures. Also excluded: loss of use or time, inconvenience,
money, travel, packaging or any other consequential or incidental damages. In
no event shall the manufacturer’s responsibility exceed the value of the
replacement product.
Warranty is to the original purchaser when items are purchased from one of our
authorized retailers and is not transferable. All warranty claims be submitted
with a dated register receipt within the warranty period. Should replacement
of the warranty item be unavailable, the manufacturer reserves the right to
substitute items of our choice that are of similar style and quality. For
quality control purposes and verification, we reserve the right to request
photography of the damage item(s ). The terms of this warranty are subject to
change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>