BEAUXMIRROR Wall Mounted LED Mirror Instruction Manual

June 7, 2024
BEAUXMIRROR

Wall Mounted LED Mirror
Instruction for
LED Bathroom Wall Mounted Mirror

BEAUXMIRROR Wall Mounted LED Mirror

INSTALLATION INSTRUCTION
Any Question?
Please Contact: support@beauxmirror.com

Wall Mounted LED Mirror Notes

Thoroughly read all instructions before installing the enclosed product. Read and take note of all safety, care and maintenance information.
Safety Precautions
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING RISK OF FIRE AND ELECTRIC SHOCK

  • All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
  • Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
  • Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
    Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.

INSTALLATION SAFETY & CAUTION

  • Inspect the product immediately upon receipt for transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
  • Ensure there are no hidden pipes or cables in the wall before drilling.
  • Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
  • The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

NOTE :

  1.  The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur.
  2. It must be understood that common sense, caution, and care are factors that can’t be built into any product.  These factors must be supplied by the person(s) caring for and operating the fixture.
  3. Do not install this fixture in hazardous locations.

Wall Mounted LED Mirror
Rectangular LED mirrors, crystal LED mirrors, dressing LED mirrors and round LED mirrors are installed in the same way.
This installation instruction applies to the following products of our company :

BEAUXMIRROR Wall Mounted LED Mirror -

Wall Mounted LED Mirror
Please keep this instruction manual for future reference for product operation and maintenance.
Installation Tools (as shown below)

BEAUXMIRROR Wall Mounte-PARTSr

Installation Instruction

Step 1
Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete, or tile surface).
Step 2
Make sure the circuit breaker for the power source of the mirror is off. Then connect the neutral (white), hot (Black), and ground (Copper wire or Green wire) between the mirror and the junction box.
Step 3
Hang the mirror with desired placement by placing the mirror’s cut out onto the mounting bracket.
Warning :
Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until installation is completed.

Instruction for Bathroom Wall Mounted Mirror
Installation Instruction

BEAUXMIRROR Wall Mounted LED Mirror -Installation
Instruction

LED Mirror Power Source FAQ

Scenario 1 (Direct Wired)
This is the most common way to connect the mirror. The LED  light & anti-fog pad are both controlled by the built-in touch
switch on the mirror.
*** The LED light is dimmable.**

BEAUXMIRROR Wall Mounted LED Mirror -Direct Wired

Scenario 2 (Wall Switch)
By doing so, the mirror is now bridged to the wall switch. In order to turn on the mirror, the wall switch needs to be on. The touch switch can be used to turn on the LED mirror and anti-fog pad. The mirror shuts down once the wall switch is flipped to OFF.

BEAUXMIRROR Wall Mounted LED Mirror -Wall Switch

Scenario 3 (Wall Dimmer Switch – Not Accepted)
This is a scenario that is not acceptable. There is no workaround for our mirror.

BEAUXMIRROR Wall Mounted LED Mirror -Wall Switch

Please Noted:
Do not try this way as it will damage the LED driver. Our friendly customer service team will work hard to put a smile back on your face.

Facebook Messenger: @GrailLifeMirror
Emails at: support@beauxmirror.com
Visit our website and give us some feedback :
www.beauxmirror.com/support

We’re just happy that you are happy with Grail-Life. We’ve got a few suggestions…

  • We hope to get your positive feedback about our mirrors.
  • Share with your friends and family.
  • Share your experience with Amazon Review.
  • Connect us on beauxmirror.com.
  • Facebook and Instagram.

Address: Shengjingshangfeng 5#515, Zhongshan City, Guangdong,China
URL: www.beauxmirror.com
E-mail: support@beauxmirror.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals