Konftel 70 Speakerphone User Manual

: June 7, 2024
: Konftel

Table of Contents

Konftel 70 Speakerphone
Introducing the Konftel 70 Speakerphone
- Important Notices
Safety and Warning Information
Package Contents
- KONFTEL 70 Collaboration unit Exterior
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Konftel 70 Speakerphone

product

Thank you for purchasing a KONFTEL product. We recommend reading this user guide in its entirety in order to maximize the performance and service life of this product. This product is intended for commercial use and should be installed by authorized personnel only.

Introducing the Konftel 70 Speakerphone

The Konftel 70 Speakerphone is interactive phone designed to be used in commercial environments, and includes the following features:

Qualcomm QCC5125
High performance Audio DSP
4 digital microphone array
5Watts 20Hz-20KHz speaker
BT5.0
5200mAh 3.7V battery
6 Touch button
3 light bar

Important Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Important Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Copyright © 2020 Konftel AB All rights reserved.
All intellectual property rights in this publication are owned by Konftel AB and protected by applicable copyright laws and international treaty provisions. Konftel AB retains all rights not
expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Konftel AB.
All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.
Konftel AB reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that Konftel AB shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use.

This device complies with CE and FCC regulations.

Safety and Warning Information

NOTE: This mark is applied to indicate that the equipment conforms to European safety and electro-magnetic compatibility standards.

Main Supply: This equipment is designed to operate from a 100-240 Volt, 50/60Hz AC power supply. The use of other power sources may damage this equipment. Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100-240V.
Main Adaptor: The supplied power adaptor is compatible with a standard main socket.

WARNING! The manufacturer will NOT accept responsibility or damage or injury caused by connecting to the wrong voltage.

If the power adaptor or lead gets damaged, it must be replaced by a qualified service agent with an approved adaptor of the same type and rating.
WARNINGS! The main plug shall be the main disconnect device and shall remain operable at all times.
Dangerous voltage constituting a risk of electric shock is present inside this equipment.
WARNINGS! Do not expose this product to moisture or place any objects filled with liquids on or near the product.

Do not push objects into holes and ventilation slots.
Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius.
Do not place a naked flame source, such as lighted candles, on or near this product.
Do not intentionally hit the device or place heavy or sharp objects on the device.
Only use accessories specified by the manufacturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs.