KONFTEL Cam50 12x Zoom and PTZ Video Conference Camera User Guide
- June 6, 2024
- Konftel
Table of Contents
KONFTEL Cam50 User Guide
SAFETY PRECAUTIONS
Electric safety
Installation and operation must take place in accordance with electric safety standards.
Use caution during transport
Avoid stress, vibration or soakage in transport, storage and installation.
Polarity of power supply
The power supply of this product is +12V, the max electrical current is 2A. Polarity of the contact is shown in illustration.
Installation precautions
Do not grasp the lens when carrying the camera. Don’t touch camera lens with your hand. Mechanical damage may be caused by doing so.
Do not use in an environement with corrosive substance to avoid any cover (plastic material) damage. Make sure there is no obstacle within rotation range.
Do not power on before the installation is completed.
Do not dismantle the camera
We are not responsible for damage caused by unauthorized modification or dismantling.
Specific frequencies of electromagnetic field may affect the image of the camera!
This is a class A product. Electromagnetic radiation at specific frequencies may affect the image quality of a TV in home environment.
Do not expose the Konftel Cam50 to water or moisture.
Do not open the casing of the Konftel Cam50.
Konftel AB hereby declares that this conference camera is in conformity with all the essential requirements and other relevant provisions of Directive 1999/5/EC.
Please visit www.konftel.com to view the complete declaration of conformity.
MAINTENANCE
Camera maintenance
- If the camera will not be used for a long time, please turn off the power switch and disconnect power cord of AC adaptor from the outlet.
- Use a soft cloth or tissue to clean the camera cover. If the camera is very dirty, clean it with a diluted neutral detergent. Do not use any type of solvents, which may damage the surface.
- Please use a soft, dry and clean cloth to polish the lens.
Unqualified use
- Do not point the camera at extremely bright objects for a long period of time, such as sunlight, powerful light sources, etc.
- Do not operate in unstable lighting conditions, to avoid image flickering.
- Do not operate close to powerful electromagnetic radiation, such as TV or radio transmitters.
PACKING LIST
APPEARANCE AND INTERFACE
- Please check that connections are correct before starting.
- Connect the AC adapter to the power connector on the rear panel of the camera. The power indicator on the front panel should light up.
- After the camera is powered on, it starts to initialize: to the top limit position and then both horizontal and vertical before stopping at the middle position. The motor stops running and the initialization is completed.
(Note: If the position preset 0 has been stored it will be the cameras default position.)
INSTALLATION
REMOTE CONTROL
SERVICE AND WARRANTY
Warranty
We give a two-year warranty on our conference devices.
Service
Service is offered after the expiration of the warranty. Please contact your reseller and ask for a cost estimate.
Konftel support
If you have any questions about the warranty and service, please contact your Konftel support centre.
Europe:
+44 1483 308 003 (Monday-Friday 8.00 AM-5.00 PM GMT-1)
+46(0)90-706 489 (Monday–Friday 8.00–17.00 GMT+1)
E-mail: [email protected]
Website: www.konftel.com/contact-support
USA and Canada:
+1 866-606-4728 (Monday–Friday
08.00–17.00 GMT-8)
E-mail: [email protected]
Website: www.konftel.com/contact-support
Konftel is a leading company within collaboration endpoint solutions. Since 1988, our mission has been to help people in businesses around the world to have meetings regardless of distance. Based on our success, we know that remote collaboration is a smooth way to save time, money and at the same time contribute to a more sustainable world.
Crystal clear audio and a sharp video image are essential for efficient meetings, this is why we only focus on cutting-edge technology in our Collaboration Solutions. Our audio technology OmniSound® is built into all Konftel Conference phones and devices. The products are sold globally under the Konftel brand and our headquarter is based in Sweden.
Read more about the company and our products at konftel.com.
Konftel AB, Box 268, SE-901 06 Umeå, Sweden
Tel: +46 90 70 64 89 E-mail: [email protected]
