Arrow DIXIE 3401 CUTTING TABLE Owner’s Manual

: June 7, 2024
: Arrow DIXIE

Table of Contents

Assembly Instructions
Parts List
Hardware Included
Tools required
Table Assembly
Wood Parts and Part Numbers
Hardware Included with Part Numbers
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Where Creativity Meets Color!
DIXIE
CUTTING TABLE
OWNER’S MANUAL

Assembly Instructions

Model Numbers:
3401 White

IMPORTANT : Please read these instructions before assembling!

Parts List

ITEM	DESCRIPTION	QTY.	PACK.
A	Top panel	1	2 of 2
A1	Top leaf	2	2 of 2
F	Fixed shelf	2	2 of 2
F1	Frame leg support	2	1 of 2
S	Side leg supports	2	1 of 2
L	Adjustable leg with casters	6	1 of 2
R	Rail	3	1 of 2

Hardware Included

ITEM	DESCRIPTION	QTY.
b1	6×12 Bolt	12
b2	8×25 Bolt	10
b3	4×8 Bolt	2
b4	6×35 Bolt	18
B	Bracket	2
p	Plastic Support Tube	2
h1	Hinge	6
r1	4mm Allen key	1
r2	5mm Allen key	1
r3	14mm Spanner	1
s1	3.5×14 Screw	42
t	Caster	6

Tools required

Table Assembly

Step 2. Slide-in adjustable legs (L) into side legs support (S) to the desired height and lock using bolts (b1) with (r1) Allen key spanner as shown on the illustration below.

Step 3. Connect the two frame leg supports (F1) with three rails (R) using bolts (b2) using Allen key spanner (r2) as shown on the illustration below.

Step 4. Connect the two side leg supports (S) with leg frame assembly (F1) using bolts (b2) with Allen key spanner (r2) as shown on the
illustration below. Place the Fixed shelf (F) on the place and attach using bolts (b4) using Allen key spanner (r1)firmly as shown on the illustration below.

Step 5. Lay panels (A1), (A) on a clean soft surface.
Attach hinges (h1) with screws (s1) following the predrilled holes as shown on the illustration below.

Step 6. Two people should flip and align entire leg assembly with holes on panels and attach using bolts (b4) using Allen key spanner (r1) firmly as shown on the illustration below.

Step 7. Attach plastic support tube (p) with connector (b) using bolt (b3) firmly as shown on the illustration below.

Step 8. Attach plastic support tube (p) and connector (b) assembly with screws (s1) firmly on both sides (A1) following the predrilled holes as shown on the illustration below.

Two people should flip the entire assembly and make sure all legs contact the ground and side leg supports are properly snapped to its connectors on both side before use.

Wood Parts and Part Numbers

Ref.	Description	Part#
Cabinet Model#	3401 (White)
A	Top Panel	3401 PART
Al	Leaf Panel	3401A1
F	Fixed Shelf	3,401 F
Fl	Frame Leg Support	3401F1
S	Side Leg Support	3401S
L	Adjustable Leg with Caster	3401L
R	Rail	3401R

Hardware Included with Part Numbers

Item	Description	Part No.
B1	6×12 Bolt	3401B1
B2	8×25 Bolt	3401B2
B3	4×8 Bolt	3401B3
B4	6×35 Bolt	3401B4
B	Bracket	3401B
p	Plastic Support Tube	3401P
H1	Hinge	3401H1
R1	4mm Allen Key	3401R1

R2
R3| 5mm Allen Key| 3401 R2
14mm Spanner| 3401R3
S1| 3.5×14 Screw| 340151
T| Caster| 3401T

Accessories to Complete Your Sewing Experience

Custom Insert
Enhance your sewing experience with a custom made insert for your Arrow or Kangaroo cabinet. Inserts are designed to reduce the gap
between the machine and cabinet opening. This provides an ergonomic work surface for the free arm of the sewing machine, allowing for straighter stitches, less fatigue and an overall better experience using your machine and cabinet.

Arrow Sewing Chairs
Our adjustable height sewing chair is a perfect accessory for any craft and sewing room. The chair’s height is adjustable with easy-to-use controls and the cushions provide perfect lumbar support and comfort for those long sewing hours. Chair features five casters on a starbase for greater movement at your sewing cabinet or crafting surface. Lift the seat cushion to reveal a hidden storage compartment for
your small notions or patterns.