ELEHOT Rechargeable Portable Bluetooth Speaker User Manual
- June 7, 2024
- Elehot
Table of Contents
ELEHOT Rechargeable Portable Bluetooth Speaker User Manual
Thank you for using our digital Bluetooth speakers.
Please read the user manual carefully before use our Bluetooth speakers!
PRODUCT OVERVIEW
This machine is a beautifully designed, portable Bluetooth stereo speakers. High-performance explosion-proof sound amplifier chip, ultra-low power consumption, super low-frequency dynamics, bass-rich, flexible, can achieve a more shocking extremely overweight bass effect. Audio input interface can be directly connected with a PC laptop, MP3/ MP4, mobile phones and other devices. Super Bluetooth receiver functions is best for Bluetooth mobile phones and other Bluetooth-enabled products.
FEATURES
- Bluetooth function
- Memory function & Resume Playback
- Built-in lithium battery, environmentally friendly and practical
- Using HIFI speakers, make sound more natural and delicate
- Audio input interface, a standard 3.5mm headphone jack, best for computer/mobile phone/etc
- Built-in microphone, can be achieved mobile voice intercom
- Support MP3 music format decoding
BUTTON INTRODUCTION
- Switch the previous song/Volume reduction
- Adjust light mode/Turn off the lights
- Bluetooth/AUX Mode
- Answer the phone/Hang up the phone/Stop play
- Switch the next song/Volume increases
- Power ON/OFF
- Type-C Charge Port
- AUX Audio Cable Port
- Indicator
KEY BASIC OPERATIONS
Turn ‘ON’ – the indicator light flicker and start quickly
Turn ‘OFF’ – the indicator is turned off and quick shutdown
Short press “ ” – You can play and pause.
Adjust Volume:
Short press “ 一 ” – the system can decrease the volume.
Short press “ + ” – the system can increase the volume.
Switch Songs:
Long press “ 一 ” key to select the previous song.
Long press “ + ” key to select the next song.
Mode switch:
Short press “ M ” key, mode switching can be carried out ( Bluetooth
/AUX).
Answer /Hang up the phone: When a call comes, short press “ ” can answer the
call, then short press “ ” can hang up the call.
Charging to use
- The machine built-in charge protection circuit, can be connected to computer or charger prolong. (Fully charged about 3 hours. )
- Each time the lifetime of the battery will be different because of the volume size when playing.
TWS CONNECTION FUNCTION
TWS connecting:
- Take two ‘A089’ speakers and turn on.
- Simultaneously press and hold the pause button of both speakers for 5s to enter the pairing mode. When they sound a tone at the same time, it means that the pairing is successful.
- After the connection is successful, turn on the Bluetooth option of the mobile phone, search for ‘A089’ on the list.
- Connect to the ‘A089’. If the names of the two speakers “A089” appear on the list at the same time, it means that TWS connection is unsuccessful. Please try the step 2 again.
Disconnect TWS:
- Take an ‘A089’ speaker. Press and hold the pause button for 5s. When both speakers sound a ‘beep’ , it means that the disconneting is successful.
- When TWS disconnection succeeded, the names of the two speakers ‘A089’ will appear on the bluetooth option list of your mobile phone at the same time.
- When TWS disconnection succeeded, both speakers return to the normal bluetooth mode and they can be connected separately.
After TWS connection, play, pause, volume and lighting operations are synchronized except the call function.
HOW TO CHECK THE REMAINING BATTERY
-
Full Charged
Low battery -
Charging – the battery icon on the phone shows the rising battery
-
Discharging – the battery icon on the phone shows the falling battery
TROUBLESHOOTING
- Automatically shut down : Low battery, please charge 3 hours after use.
- Play automatic shut down : Low battery, please charge 3 hours after use.
- The speaker no sound: Check the volume is turned.
- Button no function or functions wrong: Try again after shutdown.
- Connected to the computer no voice: PC interface connection error, please select the correct audio output interface of PC.
- Can not play music : The storage of MP3 music files could not be applied to the player, please store your files in the root directory of the removable device.
HOW TO USE
This Bluetooth speaker is suitable for all kinds of mobile phones, Bluetooth adapter or player with Bluetooth function.
- Turn on the speaker power, and the default mode is Bluetooth to enter pairing status.
- Find Bluetooth settings interface and open the Bluetooth setting if use mobile phone.
- Search for Bluetooth devices and find “A089”.
- Select it to connect. (Note: The machine has no need password paired)
- Return to the menu interface, and then you would enjoy the music.
TECHNICAL SPECIFICATIONS
Output power: 10W×2
Input Power: DC 5V/2A
Bluetooth Standard: 5.0 + EDR
Speaker: 52mm 4Ω 10W
Transmission distance: 10 meters
Frequency effect: 150 Hz~15K Hz
Maximum Current Consumption: 2600mAh
Audio Signal Input Interface: 3.5mm Standard
PACKING ACCESSORIES
1×Bluetooth Speaker
1×User Manual
1×USB Power cable
1×3.5mm Audio cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>