FIRDUO Electric Jet Board Instruction Manual

FIRDUO Electric Jet Board Instruction Manual

Q 11PACKING LIST

NO

|

NAME

|

QUANTITY

---|---|---
1| FIRDUO Jetboard|

1

2

|

FIRDUO Waterproof Batteries

|

1

3

|

Charging adapter

|

1

4

|

User Manual

|

1

5

|

Plug-in Kit

|

1

PRODUCT DESCRIPTION

1. The FIRDUO bodyboard adopts an injection molding process, a utility model patented waterproof battery compartment, which is convenient for disassembly and installation. The user can remove and replace the battery easily, and the waterproof rating is IP68.
2. The FIRDUO bodyboard adopts the patented design of ship type, which can weaken the resistance of water. it has strong buoyancy, so it also can be used as a rescue board in an emergency.
3. The FIRDUO bodyboard uses an intelligent integrated control system, three speed modes (low/ middle/high), and each gear is integrated into a fixed-speed cruise mode.
4. The FIRDUO bodyboard’ s Stop&Start system. It will automatically standby after 5 minutes of use and automatically shut down after 1 0 minutes of use.
5.  FIRDUO bodyboard has a gopro camera bracket interface.

02,Product Information

0 31Product Introduction

04,Product manual

1. Battery installation instructions
   First take out the female end of the battery compartment power cord plug, and insert the male terminal of the battery according to the plug logo. The sound of “click” prompts the interface to be locked. You can gently pull the plug to confirm; then put the battery power cord into the battery compartment wire slot and battery plug Align the end with the plug slot and the buckle at the mouth. Put the battery into the battery compartment at the lower end, and then press the other end of the battery to gently press down. The buckle of the battery compartment “click” prompts to lock, you can gently lift the battery strap to confirm; then buckle For the battery compartment cover, toggle the elastic switch of the compartment cover to open and close and lock. As shown in pictureG)Q)@
   

2. Instructions for use of power plug
   CD Install the power plug: Insert the female end of the power cord plug into the male connector of the battery according to the plug logo. A click will prompt the interface to be locked. You can gently pull the plug to confirm; (g)Remove the power plug: Press the two small ears on the female end of the power cord plug by hand, refer to the arrow of the plug logo,
   rotate counterclockwise to the limit, and pull it out;
   

3. 3 ,Charging matters instruction
   CD When charging, connect the power plug, refer to the above 2CD. (g)The red light on the charger indicates that battery is charging, green light indicates charging completed, and please stop charging when light is green. Long-time charging could cause sever damage to battery.Make sure charge the battery once a month when not using it often, otherwise battery could be damaged as well. @ After the charging completed, unplug the charger from the electric outlet, then disconnect the battery from the charger, refers to cg) above. When the product is not used often, please put it in a dry and ventilated place.
   

4. Reminder f
   CD When charging, please make sure that the charging port is dry. Don’ t get the plug and charger wet, because this may cause electric shock. Do not touch it with wet hands. During the charging process, if there is any malfunction, immediately unplug the charger. cg) Please pull out the plug, do not pull the plug from the charging cable. 11 the charger or charging cable is obviously damaged, please replace it in time.
   @When charging, the product must be placed in a safe area,Keep your children away from it.

0 511 nstructions

1. Hold the power switch for 3 seconds to turn the display screen on. It always rnernorizes last speed set.To switch the speed rnodes, press”+” and”-” on the right handle. To start the machine or get into standby mode, press “safety key”on the left handle.Hold the power switch for 3 seconds to shut down.
2. Press and hold the power switch for 3 seconds to shut down the system; the product stops using for 5 minutes, the system enters an automatic standby state, and shuts down automatically after 1 O minutes.
3. When use the product, first turn on the power switch, the driver stands in the water, then gently lay on the FIR DUO . hold both handles when you are driving, choose a speed gear that you are happy with.and can adjust the speed gear according to his needs.
4. You can also turn off the FIRDUO and use it as a swimming board.
5. Slightly tilt your body to turn right or left.
6. (DSettings (language setting):
7.  Long press the “Settings” button for 3 seconds to enter the setting interface; 8After entering the interface, use the “+” and “-” button on the right control handle to select the option (language) to be set, and after selecting it, short press the setting button Confirm the setting item (language); 9After entering the setting item, select the setting content (English or Chinese) with the “+” and ” – ” keys on the right control handle, and short press the “Settings” key to confirm; 8After the setting is completed, long press the “Settings” button for 3 seconds to exit the setting interface; 0Setting (warning battery): the method is the same as above;
   @Setting (gear setting): the method is the same as above; Description of gear mode: Manual mode: the factory default mode, in this mode, the gear can be switched at will by the “+” and “-” keys on the right control handle; High, medium and low gear modes: The gear positions set through the setting in terface are fixed, and the gear positions cannot be switched by the “+” and on the right control handle.
   

prompt !

(j) FIRDUO seal airship is not a substitution for life-saving supplies, Using in a intensive situation is not recommended.
(1) Make sure that the power plug is locked tightly to avoid water short circuit at the power interface. Please power on and debug the product before launching it as soon as possible after use.

06,Notes

Minors under 18 years must use under adult supe,vision.
Forbidden to use in 1urbulent water flow, vortex environmen1s.
Forbidden to use in 1urbulent water flow, vortex environmen1s.

Do not 1ouch the propeller while the product is running.

Forbidden to launch water when the power plug is not locked.

Forbidden to launch water when the battery compartment cover is not locked.

Forbidden to remove the thruster yourself.

Forbidden open flames.

oo not hit, drop violently .

Forbidden to remove the controller yourself.

OhProduct VVarranty

1. Scope of warranty service
   G) The company’s products implement the relevant national three guarantees regulations, and provide free repair, replacement and return services for products that meet the warranty conditions (limited to products
   purchased in mainland China). In addition to postage and transportation costs, warranty services are provided free of charge.
   (1) Component such as battery buckle, battery strap, thruster thruster cover and etc are not covered by warranty. Batteries that not use based on the guideline above are not covered as well.

2. Warranty exceptiOn (all the cases listed below will not be covered by warranty)

3. The product has been purchased for more than 1 year.

4. Any damage causes by violating guidelines and instructions will not be covered by warranty.

5. Any unauthorized dissemble and repair

6. Any aggressive and careless use, such as fall,impact, severe oxidation and etc.

7. Any damage caused by fire, liquid erosion, freezing, earthquake and other extreme conditions or majeure.

8. Failure or damage caused by other non-product design, technology, quality and other problems.

3 ,Product Repair Service Policy

1. For any cases not covered by warranty, our after-sales service stations and dealers do offer repair service, but all the costs will be paid by users.
   (1) Users can call the company’s official service phone for after-sales assistance, or directly contact the dealer where the product was purchased to get after-sales service.

2. After 3 days received damaged product , a fault analysis, and estimated repair time will be sent to user.

3. After the user Agree on the cause of the fault, fault responsibility, maintenance cost and maintenance completion time, our company starts to repair the product.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>