BELLA VITA BVAIRPFLEGA Air Compression Pneumatic Full Leg Massager User Guide

USER GUIDE
AIR COMPRESSION PNEUMATIC FULL LEG MASSAGER
BVAIRPFLEGA

SAFETY & WARNINGS

• Do not use voltage beyond the requirement of this product
• Do not attempt to repair or dismantle the product as there are no user-serviceable parts.
• Do not use the product in a place where it may become wet or damp. If the unit becomes wet, discontinue use immediately.
• Stop using the product immediately if you feel uncomfortable or any abnormalities occur.
• Do not use this product in a high-temperature environment.
• Do not use this product if you are currently pregnant or menstruating.
• Do not place the unit near flammable items, explosive items, or chemicals.
• Do not touch the unit with any sharp objects.
• Do not use this product if any of the below apply to you:
  – Your skin is infected, swollen, burnt or otherwise damaged.
  – You have a pacemaker or other medical implant
  – You are suffering from heart disease.
  – Your bones are fragile or injured.
  – You are suffering from cancer.
  – You are receiving medical treatment, or your blood pressure is not normal.
  – You are suffering from osteoporosis.

OVERVIEW

1. Leg massager
2. Air pressure hose
3. LCD screen
4. Control panel

Controls

1. POWER – Press to power on the device. Press a second time to adjust the intensity between Low, Middle, and High. Press and hold for 3s again to power off the product

2. MODE – Press to select from the three available modes.
   • Mode 1: Pressing (Calf + Thighs + Foot Airbag)
   • Model 2: Kneading (Calf + Thighs)
   • Mode 3: Shiatsu (Foot)

3. HEAT – Turns the heat function on or off. The heating function is positioned in the Knee and Calf areas of the massager.

OPERATION

1. Slip on each massager, keeping your feet flat on the bottom. Note that each side is marked L and R for each foot accordingly.
   

2. Use the Velcro straps to tightly secure your feet and legs into the massager.

3. Move your foot around to ensure that the massager is securely fastened.

4. Insert both air pressure connections into the controller.
   

5. Press the power button to power the device on.

6. Adjust the air pressure strength and mode using the Power and Mode buttons on the controller. You can view the current mode and intensity on the LCD screen.

Note:
The device will automatically shut off after 20 minutes.

For best results, do not use the leg massager for more than an hour at a time.

Modes:

Heat – The Knee and Calf areas of the massager are equipped with a heating function, and the heat levels can be selected accordingly.

CLEANING & CARE

• Store the product in a dry place, away from moisture and direct sunlight
• Wipe clean with a dry towel.

TROUBLESHOOTING

Make sure the unit is fully connected to the power.
The power button was not pressed.| Press the power button.
The device suddenly stops working.| The unit was running for more than 20 minutes.| Restart the unit to resume use.

SPECIFICATIONS

IN THE BOX

•  Leg massager
• Power adapter
• User guide

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Documents / Resources

| BELLA VITA BVAIRPFLEGA Air Compression Pneumatic Full Leg Massager [pdf] User Guide
BVAIRPFLEGA, Air Compression Pneumatic Full Leg Massager
---|---

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>