ZOTAC VR GO 3.0 User Guide

ZOTAC VR GO 3.0

PACKAGE CONTENTS

• 1 x ZOTAC VR GO 3.0 SYSTEM
• 1 x Backpack Strap Add-on
• 1 x AC Adapter
• 1 x Power Cord
• 1 x DC 12V Power Cable
• 2 x Batteries
• 1 x Battery Charging Dock
• 1 x User Manual & Quick Start Guide
• 1 x Support DVD (optional)
• 1 x OS Recovery USB Drive

BATTERY CHARGING

Note: The VR GO 3.0 system does not support charging the batteries directly.

1. Insert the batteries into the battery charging dock.
   

2. Connect the AC adapter to the battery charging dock.
   

3. All battery LEDs will be OFF when fully charged.
   

4. Press the battery status button to check battery status if need.
   

TOP PANEL

1. Power output (DC12V)
2. HDMI port
3. USB 3.0 ports

FRONT PANEL

1. Power switch
2. Battery lock
   

RIGHT PANEL

1. Power input (DC19.5V)
2. USB 3.0 ports
3. LAN (RJ45) port
4. Memory card slot
5. DP port
6. HDMI port
7. Headphone/Audio Out jack
8. Microphone jack
9. Power output (DC12V)

SETTING UP YOUR ZOTAC VR GO 3.0 SYSTEM

1. Connect USB 3.0 devices
2. Connect to home network
3. Connect DP display
4. Connect HDMI display
5. Connect headphone/audio out device
6. Connect microphone device
7. Connect VR head-mounted display (optional)
8. Connect power cable
9. Turn on the system
10. Follow the on-screen instructions to complete the initial 9 setup of Windows. This process may take several minutes.

ATTACHING BACKPACK

1. Lay the ZOTAC VR GO 3.0 on a flat surface with the backcover facing upwards.
   

2. Lay the ZOTAC VR GO 3.0 on the backpack. Align the white line of backpack with the bottom of VR GO 3.0.

3. Push the backpack. When you hear a click, it means the installation is in place.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>