GEE-BON GB-UF-08 Under Sink Water Filter System User Manual
- June 6, 2024
- GEE-BON
Table of Contents
- USER MUST READ
- PRECAUTIONS
- PRODUCT FUNCTIONS
- APPEARANCE CHARACTERISTICS
- TECHNICAL PARAMETERS
- PRODUCT FEATURE
- Filtration performance
- PACKING LIST
- INSTALLATION NOTE
- INSTALLATION STEPS
- CARE AND MAINTENANCE
- WARRANTY SERVICE PROVISION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Under Sink Water Filter System
GB-UF-08 User ManualPlease read the user manual
carefully before use and keep it properly.
USER MUST READ
The user must follow the installation specifications described in this
“Product Installation and Operation Manual” Otherwise, for the damage or
leakage of the water purifier caused by failure to install, use, or purify the
water purifier by the instructions, the company will not bear any economic and
legal responsibility.
The user can refer to the installation video posted on GEE BON Amazon Store
and contact our 24-hour online customer service.
- Regularly check whether there are leaks in the water purifier and water pipe fittings to avoid property damage caused by leaks.
- This water purifier is designed for home users only and may not be suitable for other purposes.
- The filter element of the water purifier for maintenance and replacement of required replacement parts need to be approved by our company. Quality issues caused by the use of unauthorized parts or accessories, reduced performance, or property damage are not covered by the warranty.
- Maintenanceofthewaterpurifierand replaces mentor the filter element assembly is paid service.
PRECAUTIONS
- The inlet water qua lit you this water purifier mini cipaltap water that complies with GB5749.
- Do not install this water purifier on a water supply pipeline with a water pressure exceeding 0.6MPa. If the inlet water pressure exceeds 0.6 MPa, a pressure-reducing valve must be installed (purchased separately).
- The water inlet temperature of this water purifier is 5 – 38 ° C. The water inlet temperature exceeding 38 °C may damage the seal and cause water leakage; the water inlet temperature below 5 ° C may cause freezing, cause pipeline rupture, and cause water leakage.
- The installation order of the water purifier filter element must not be reversed to avoid affecting the normal function of the water purifier.
- Do not install the water purifier in the reverse direction. Connect the water inlet line to the water outlet.
- Do not install the water purifier in a place exposed to direct sunlight or exposed to harmful chemicals, or where it may be damaged by being dropped, hit, etc.
- Do not install the water purifier near any heat source.
- Do not install the water purifier upside down.
PRODUCT FUNCTIONS
This product realizes the filter element life reminder function. When the life expires, the LCD and the buzzer will give a double alarm; which uses button batteries, under normal circumstances, it can be used for 6 months.
1 Basic operation of the control panel 1.1 Display panel description
- Filter life reminder, using 3 circles indicate filter life, the unit is the day.
- Auto memory function: The service life is stored in the non-volatile storage after a power failure, and the permanent memory of power failure is realized.
- Buzzer alarm function: When the life of the filter element is nearing the end, the buzzer will sound like a reminder.
1.2 Filter life reminder function
“A”: represents the first-stage filter element(PP), and the corresponding
value displayed is the life of the filter element of the stage;
“B”: represents the 2nd-stage filter element, and the corresponding value
displayed is the life of the filter element of the stage;
“c”: Represents the third-level filter element, and the corresponding value is
the life of the filter element;
A, B, and c alternate display every 3 seconds. The meaning of the numerical values is as follows:
The displayed value is the remaining days of use of the current filter element, countdown method, such as 180.19..0 When the remaining days are less than or equal to 15 days, the display value flashes, prompting the user to replace the filter element in time. 1.3 Battery level reminder
When the battery level can meet the system requirements, the battery level icon is always on; When the battery power cannot meet the system requirements, the battery power icon flashes;
1.3 Battery level reminder When the battery level can meet the system requirements, the battery level icon is always on; When the battery power cannot meet the system requirements, the battery power icon flashes;
1.4 Automatic memory function
The intelligent control board calculates the use time of the filter element
and stores the related data in the internal memory. Automatically stored once
every period of time, the system will not be lost when the power is off; when
the system is powered on again, the control board continues the previous
processing.
1.5 Buzzer function
Each time the button is operated, the buzzer beeps once; When the life is less
than or equal to 15 days, the buzzer will beep every 3 hours, 3 short beeps,
and each beep interval is 5 seconds;
1.6 Key operation functions
The service life of each filter element can be set. After power on, the LCD
enters the normal display interface, as shown in the figure below. Under this
interface, press and hold for 3 seconds press the key to enter the life
setting interface. By default, it starts with the first digit of the first
level, that is, “A” and the first digit flash.
1.6.2 Life reset function:
When the life of the filter element has expired, after the replacement of the
filter element, it is necessary to reset the life of the filter element on the
intelligent control board. In the normal display interface, press and hold the
button for 8 seconds to enter the life initialization interface. Both the
digital value of the filter life and the number of filter stages are
displayed.
Under this interface: Press the button once to select the number of filter element stages to be initialized Press and hold the button for 3 seconds to initialize the current filter life;
Remarks : In the life reset interface, if no key is pressed within 20 seconds, it will automatically exit the life reset interface and return to the main interface.
1.7 Backlitdisplayfunction
When the key is pressed, the backlight screen turns on. After the key is
released for 20 seconds, the backlight screen goes out. When the backlight is
on, the displayed color is: When the remaining life of the filter element is
greater than 15 days, the backlight screen displays blue; When the remaining
life of the filter element is15 days or less, the backlight screen displays
red;
Watching the video posted on Amazon Store or Contact 24h on-line customer service.
APPEARANCE CHARACTERISTICS
TECHNICAL PARAMETERS
Model
|
Water purifier
---|---
Inlet water pressure| 0 .1MPa-0.6MPa
Inlet water temperature| 5-48°C
Net water flow| 5 L/Min
Approximate rated total net water| 2500L
Water inlet requirements| Municipal tap water in accordance with GB5749-2006
The rated total clean water volume is according to the inspection regulations of the Ministry of Health. The effective treated water volume after the entire process is added. The actual total water treatment volume of the specific user will vary depending on the local water quality and the use environment.
PRODUCT FEATURE
Product introduction
This water pump rifler is designed to be used under the countertop of the
kitchen near the sink. Connect the existing water pipe in your home with a
water supply line fitted with a tee joint. The purpose of this water-up rifler
is to purify drinking water.
The design of this water purifier is about 2500-3000 liters of drinking water
or PP three-dimensional dense fine filter element components use for 4-6
months, AMS activated carbon fiber components (with lead removal function) use
for 6-8 months. The UF ultrafiltration fill is used for 12-16 months
(adjusted according to the difference in water quality and water volume), and
the filter element components at all levels must be replaced within the time
limit, otherwise, it will affect water quality safety.
Main parts of the product
- Wall seat part of the puffier
- PP three-dimensional fine precision filter
- AMS activated carbon fiber module (with lead removal function)
- UF ultrafiltration membrane filter element assembly
- Three-way ball valve kit
- PE pipe
- Dedicated lead-free faucet
Filtration performance
Filter element
|
Effectively remove/kill
---|---
PP three-dimensional fine precision filter| Suspended matter, colloid,
sediment, rust, particles, and other impurities
AMS activated carbon fiber (with lead removal [function)| Gran ular impurities
such as sediment and rust and impurities such as hummus
Off-color, off-odor, residual chlorinerust, and impurities such as hummus
Heavy metals such as lead
UF ultrafiltration membrane| Turbidity and other impurities
Polymer Organics.
E. coli and other microorganisms
Note:
Do not freeze the water supply and drainage lines or this water purifier.
If the water temperature or ambient
the temperature drops below 5ºc, shutting off the supply of the water purifier
will cause failure, damage, and possible injury to the casing or water supply
pipeline.
PACKING LIST
Serial number
| Name|
Quantity
---|---|---
1| Wall base assembly| I set
2| PP three-dimensional fine precision filter| 1 set
3| ANSactivated carbon fiber module (with lead removal function)| I set
4| UF ultrafiltration membrane filter element assembly| I set
5| Accessories| -3/8- PE white tube| 2meters
6| 4 tee| 1
7| 3 tee ball valve kits| 1
8| Screw| 2
9| Manual| I copy
10| Certificate of conformity| 1
11| Warranty Card| 1
INSTALLATION NOTE
Preparations before installation
- Confirm the position where the water purifiers are to be installed. (Depending on the actual situation during an installation
- Confirm whether the various accessories required for installation are complete. (See packing list for details)
- please close the water valve before installation
INSTALLATION STEPS
corresponding positions on
the back of the machine
Install
the PP filter element assembly to the first stage of the wall base, the
activated carbon filter element to the second stage, and the UF membrane
filter element assembly to the third stage level. Align the two connecting
tubes of the filter element with the connecting holes in the wall base, and
turn them counterclockwise to the end.
Use a screwdriver against the internal buckle, pull
out the plug and insert the pipe. Cut the matching 3/8″ PE pipe into two
sections, one connects the three-way ball valve joint with the wall seat, and
one connects the faucet with a water filter system.
Hang the entire group of water purifiers on the wall
mount screws to rinse and start the water purifiers
- Open the household water valve and small ball valve,
- Turn on the faucet and the water flow enters the water purifier. Due to the action of carbon particles and air bubbles, the initial water flow is rarely turbid. This is normal.
- Continuously flush the new water purifier for about 10 minutes, until the water flow is clear and free of
bubbles, and you can provide drinking water.
CARE AND MAINTENANCE
Recommended replacement time for each element (Adjusted according to different water quality and quantity)
Filter element name | Suggested replacement time |
---|---|
PP 3-dimension filter | 4-6 months |
AMS activated carbon fiber (with lead removal function) | 6-8 months |
OF ultrafiltration filter | 12-16 months |
The replacement time will be adjusted according to the water quality and use method.
- The cycle of various filter elements recommended by this water purifier is based on statistical estimates of the average index of tap water in various places. If the water quality and the machine usage rate at the user’s actual use are significantly different from the average index, the use of the filter element and the estimated period will be significantly different. The actual use status is used as the basis for replacing the filter element, and please contact the online customer service in time.
- The estimation of the service life of the filter of the water purifier is based on the water consumption of ordinary households, and it is only suitable for domestic use. It is not necessarily suitable for public places with large water consumption.
Filter element combination replacement method
- The filter element is aligned clockwise with the wall base until it cannot be rotated, and the filter element will automatically fa II off the wall base.
- Select the corresponding replacement filter element, align the two connection pipes of the filter element with the connection holes in the wall base, and turn them counterclockwise.
- It is not necessary to close the water inlet valve when the filter of the water purifier is replaced, the wall socket will automatically close the water outlet. When removing the filter element, a small amount of water may flow out of the filter element.
WARRANTY SERVICE PROVISION
-
Warranty period
The whole machine is guaranteed for one year, and the consumables are not covered by the warranty (consumables include various filter elements). -
Warranty conditions
The user shall abide by the following rules, otherwise, the warranty right will be lost. Users should purchase this product from legal distributors through legal channels. The user should keep the purchase invoice and instructions properly.
Use of the machine must be carried out in strict accordance with the instruction manual. -
Exceptional conditions
Product failure or damage in one of the following cases is not covered by the warranty
1. Obtain this product through illegal means or illegal channels.
2. Missing invoices and machines that cannot provide relevant proof materials.
3. Use unauthorized parts or accessories.
4. 1 m proper use, failure, or damage caused by violation of the “Product Manual”.
5. Failure and damage caused by forcible use of the product beyond normal use conditions.
6. Damage caused by force majeure. -
Warranty service
Du ring the warranty period, if the warranty conditions are met, and the exception conditions are not violated, the machine will fail in the event of failure or damage. The company will provide a full range of warranty services, including free repair of faulty machines; free replacement of faulty parts; other national regulations, including the “Consumer Rights Protection Law”, “Product Quality Law”. -
Warranty service procedures
Please turn off the water immediately once the user finds a malfunction when using our products. After confirming that the conditions meet the requirements, the online customer service should be contacted in time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>