darter DATHK9 Intelligent Sensor Soap Dispenser Instruction Manual

June 6, 2024
darter

Intelligent Sensor Soap Dispenser
K9

darter DATHK9 Intelligent Sensor Soap Dispenser

Appearance

darter DATHK9 Intelligent Sensor Soap Dispenser-
appearance

Specification

  1. Accuracy: ±0.2°C (34-45°CZZ, put it in the operating environment for 30 minutes before use)
  2. Alarm type: flashing + bleeping “DIDIDI”
  3. 3.Measuring distance: 5cm-10cm
  4. LED display: Number
  5. Interface: USB Type-C Port
  6. Bottle Capacity: 1000mL
  7. Mounting Type: Wall-hanging, Tripod-fixed
  8. Working Temperature: 10°C-40°C ( 15°C-35°C Recommended)
  9. Measuring range: 0-50°C
  10. Response time: 500ms
  11. Standby time: 5s for non-working, dynamic loop with white light
  12. Input:DC 5V 1500MA
  13. Dimension: 119133280mm 1
  14. Liquid type: hand sanitizer

Conditions

  1. Standby. the white dot on the bottom of the right corner flashing by turns. (Fig. 1)darter DATHK9 Intelligent Sensor Soap Dispenser-fig 1

  2. Normal temperature: displays current temperature and green light flashes once on the display. (Fig. 2)

  3. Abnormal temperature: displays current temperature and red light flashes on the display. (Fig. 3)
    darter DATHK9 Intelligent Sensor Soap Dispenser-fig 2

  4. Out of measuring range: “Lo”: Ultra-low temperature alarm.(Fig. 4); “HI”: Ultra-high temperature alarm. (Fig. 5)

darter DATHK9 Intelligent Sensor Soap Dispenser-fig 4

Instructions

  1. Temperature measuring and handwashing: Put your hand on the bottom until you hear a “DI” sound, then the LED screen will display the temperature and hand sanitizer squeezed out. (Fig. 6)darter DATHK9 Intelligent Sensor Soap Dispenser-fig 6
  2. Temperature unit switch: Press the C/F button on the right side of the device. (Fig. 7), the LED screen will display C or F, C:centigrade, F: Fahrenheit. (Fig. 8 and Fig. 9)darter DATHK9 Intelligent Sensor Soap Dispenser-fig7

Mounting

  1. Tripod mounting: There is a screw connection on the bottom which can be connected with a tripod. (Fig. 10)

  2. Wall-handing: There are two handing holes on the backside that can be fixed with nails. (Fig. 11)
    darter DATHK9 Intelligent Sensor Soap Dispenser-fig 10

  3. Power On/Off: Press the switch button on the right side of the device. (Fig.12)

darter DATHK9 Intelligent Sensor Soap Dispenser-fig 12

Warnings

  1. Do not pour hand sanitizer into Temperature Measuring Probe and Proximity Sensor.
  2. Make sure that it is standing upright after filling in hand sanitizer.darter DATHK9 Intelligent Sensor Soap Dispenser- symbol

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals