SoundSwitch Control One User Guide
- June 6, 2024
- SoundSwitch
Table of Contents
SoundSwitch Control One
Welcome
Thanks for purchasing the Control One. We are stoked to have you on the
SoundSwitch team.
This quickstart guide will help you set up your new lighting controller.
Once connected, the software will step you through the final setup process.
for more details check out:
SOUNDSWITCH.COM/CONTROL
If you need help at any stage, please email us at support@soundswitch.com
Alternative Setup options
Control/Button Guide
Connecting Lighting Hardware
Step 1: Connect your fixtures to power and turn them on.
Step 2: Set the fixtures to DMX Mode and then select the DMX Address for
each fixture.
Step 3: Connect a DMX cable to the DMX Output labeled “Universe One”.
Step 4: Connect the DMX cable to the first fixture’s DMX Input and
continue to connect cables from each light to the next.
This is called ‘daisy chaining’.
For additional instructions, follow the hardware setup tutorial at
soundswitch.com/getting-started
Hardware Setup Illustrations
Step 1
Download and install the latest version of the software from
soundswitch.com
Step 2
CLOSE ALL APPLICATIONS INCLUDING SOUND SWITCH
Connect the Control One via USB to your computer
Step 3
Open SoundSwitch.
Follow the onscreen setup guide to configure the Control One
SOUNDSWITCH.COM/CONTROL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>