YTE S7 Cordless Vacuum Cleaner User Manual

YTE S7 Cordless Vacuum Cleaner

Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Ple

Notes:ase review this manual thoroughly before operating your device.
All pictures in this manual are for illustration purpose only. Actual product may vary due to product upgrade.

Important Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully and keep them at hand when setting up, using, and maintaining this device.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may cause a risk of fire when used with another battery pack.
• This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the device by a person responsi-ble for their safety.
• Children should be supervised to ensure they do not play with this device.
• Cleaning and maintenance shall not be performed by children without adult supervision.
• The battery must be removed from the device before the device is disposed of.
• This appliance must be disconnected from the mains supply when removing the battery.
• The used battery should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations.
• Fully assemble before operating.
• Intended for household use only.
• Do not use outdoors or on wet surfaces.
• Do not leave this appliance unattended when it is plugged in. Unplug it from the outlet when you are not using it and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer recommended attach-ments.
• For the purposes of recharging the battery, only use the detachable power supply unit provided with this device.
• Do not use with a damaged cord or plug. If the appliance is not working as it should, or has been dropped, damaged, or submerged in water, contact our customer service for advice.
• Do not handle the plug or appliance with wet hands.
• Do not unplug the adapter by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
• Do not put any object into openings or vents. Do not use if any opening is blocked. Keep free of dust, lint, hair, and anything else that may reduce airflow.
• Keep hair, loose clothing, fingers, and other body parts away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Always turn off this appliance before connecting or disconnecting the motorized floor brush.
• To prevent unintentional starting, ensure the appliance is switched off before installing the battery pack, picking up or carrying the appliance. Do not carry the appliance with your finger on the power switch, doing so may cause accidents.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Do not use without the dust box and/or filters in place.
• Store this appliance indoors, in a cool and dry area.
• Make sure that the outlet voltage corresponds to the voltage rating on the charger’s label.
• Do not attempt to repair or disassemble this appliance. There are no user-serviceable parts inside. Repair or service must be performed by a qualified repairman and only identical replacement parts can be used. This will ensure the safety of the appliance.
• This appliance includes a rechargeable lithium-ion battery pack. Do not expose the battery pack or appliance to fire or excessive temperature (above 130°C/265°F), as it may catch fire and/or explode.
• Do not use a damaged or modified battery pack, as it may catch fire and/or explode.
• Follow all the charging instructions and do not charge the battery pack out of the temperature range specified in the instructions, otherwise, it may damage the battery and increase the risk of fire.
• Do not attempt to disassemble the battery pack.

Warranty

We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty on all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices.

Getting to Know Your Device

What’s in the Box

Main Unit

Floor Brush

Using Your Vacuum Cleaner

Wall Mounting

Assembling

Attach your desired cleaning accessory to the metal tube or main unit of the vacuum as illustrated.

Charge Your Vacuum

The vacuum is powered by the built-in lithium battery. Before first use, charge the battery for at least 3.5 hours.

Notes:

• The vacuum cannot work while charging.
• The power indicator(s) is(are) flashing during charging, and stay white when fully charged.
• The power indicators flash when the battery is low.
• The vacuum cannot be charged when the ambient temperature is below 10℃/50°F or above 45℃/113°F.

Cleaning

Before use, make sure that the vacuum is fully charged and the dust box and filters are cleaned, dried, and fixed in place.

Maintenance

For optimal performance, follow the instructions below to clean and maintain the vacuum regularly. The cleaning/replacement frequency will depend on your usage habits of the vacuum.

Recommended Cleaning / Replacement Frequency

Note:
We manufacture various replacement parts and assemblies. If you think you need a replacement part, please contact our customer service for more information.

Clean the Dust Box and Filters

CAUTION

• Turn off the vacuum before cleaning it.
• If the dust box is filled with dust, the vacuum may stop to prevent overheating.
• Clean the dust box before it fills to the MAX line.

1. Dissemble the metal tube.

2. Press the dust empty button to empty the dust box.

3. Press and hold the dust box release button and turn the dust box clockwise to release it.

4. Turn the metal filter clockwise to release it.

5. Turn the HEPA filter clockwise to release it.

6. Take the sponge filter off.

7. Shake off debris by tapping the filters against your trash container.

8. Rinse the dust box and filters.

9. Air-dry the dust box and filters completely before reassembly.
   
   Note:
   Do not use a brush, hot water, or any detergent to clean the filters.
   CAUTION
   • Keep away from direct sunlight.
   • All parts must be completely dry before reassembly.
   

10. Install the sponge filter on the HEPA filter and turn the HEPA filter counter-clockwise to install it in the metal filter.

11. Turn the metal filter counter-clock-wise to install it in the main unit.

12. Make sure that the grooves on the dust box are aligned with the buckles on the main unit, and then push the dust box upward into the main unit.

13. Turn the dust box counter-clockwise until you hear a click.

Clean the Rolling Brush

1. Turn off the vacuum, press the floor brush release button to remove the floor brush from the metal tube.

2. Press the rolling brush release button to release the rolling brush locking strip.
   

3. Take out the rolling brush locking strip and lift the rolling brush to remove.

4. Clean the rolling brush using scissors or other tools, rinse and then air-dry the rolling brush.
   

5. Reinstall the rolling brush by inserting the fixed protruding end first and then clicking into place.

6. Push the rolling brush locking strip in until you hear a click.

Troubleshooting

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>