VAENSONG F9 Wireless Bluetooth Earbuds User Manual

June 6, 2024
VAENSONG

Bluetooth
Earbuds User Manual
F9

Customer Support: FranTech886@gmail.com

Specification of Earbuds

  1. Product Name: AMOI F9
  2.  Bluetooth Version: Version 5.0
  3.  Protocol: Supports HFP 1.7, HSP 1.2, AVRCP 1.6, SPP 1.2 and PBAP 1.0
  4. Chipset: BT8832A
  5. Working distance: 10M
  6.  Call Time: 5-6H (1 time full charged)
  7.  Play Music Time: 5-6H (1 time full charged)
  8.  Standby time:650H (With charger case)
  9.  Frequency:2402MHz~2480MHz
  10.  Battery type: 3.7V, >50mA Li Battery
  11. Charging Time: 1-2H
  12. Working Temperature: -10°-55°

Specification of charger case:

  1. Input current: 5V 1A
  2. Output current: 5V 1A
  3.  Battery type: 3.7V
  4.  Charging time:1-2H

Sketch

Fitting

How to operate the earbuds:

  1.  Make sure that the charging case has electricity. If the charging compartment is out of power, please fully charge the charging compartment;(Pick up the two earbuds and put them back on the cover. The charging compartment indicator lights up to indicate that there is power. If it does not light, it means no power.)
  2. Take the two earbuds out of the charging case and wear them on the left and right ears respectively. The earphones will automatically turn on and automatically pair;(Voice prompt: power on, left channel, right channel, waiting for connection).
  3. Turn on the phone Bluetooth and click on the connection pair name “AMOI F9” to connect (voice prompt “Connected”).

How to pairing

Warming remain

Turn on: Press and hold the touch multi-function button for 3 seconds or take it out from the charging case, the earbuds will be turned on automatically
Turn off: Press and hold the touch multi-function button for 5 seconds (Led light turn red and stay) to shut down, or directly put the earbuds back into the charging case, the earbuds automatically turn red and automatically turns off.
Answer and hang up: When the phone comes, short press the touch button one time, answer the phone, short press the touch button one time when call end
Reject the phone : Press the touch button for 3s, reject the phone
Start Siri: Long press Right earbud or Left earbud for 1s you will hear “DU”, release and phone voice control is started. Siri supported only
NEXT/PREV Songs: Double click on the Right earbud(R), it plays the next song, double click on the L earbud, it plays the previous song

Volume +/-: Continuous press right earbud 3 times to turn up the volume; continuous press left earbud 3 times to turn down the volume, or you can adjust the volume on the phone directly.

Single Earbud Mode : When the main earbud (R) and the secondary earbud (L) are not connected, take out one of any of the earbuds separately from the charging case. The earbud prompts “turn on”, then for 3 seconds, the blue light flashes—the red and blue lights flash alternately, open the mobile phone Bluetooth function, search for the Bluetooth device and click Connect, the “Bluetooth Connected ” will be displayed in the upper right corner of the phone screen, and the earbud will prompt “Connected”, or the manual operation of a single earbud will repeat the above operation.

Remark: Single-use

Main earbuds(R) Bluetooth name: AMOI F9
secondary earbud (L) Bluetooth name: AMOI F9 L
Repeated use: the earbuds have been connected with the mobile phone— open the phone Bluetooth, and take out the two earbuds from the charging case, without any operation, it will connect with the phone automatically. If you use a different phone, you need to follow the steps in the instructions for use.
Special Note: The two earbuds are well-paired before packaged, but if they can not be paired well due to some wrong operations, pls. do as following steps to re-pair the earbuds. Power of the two earbuds, then press the button of the two earbuds at the same time and do not release for about 10s, blue lights sparkled —-> red and blue lights sparkled alternatively —> release —>two earbuds are in the situation of paired, and they are ready for phone searching.
Note: This operation also clears the team record between the phone and the earbuds, so you need to delete the Bluetooth pairing record before the phone and then search for the connection again.

Care and maintenance:

  1. To avoid any misoperation caused by collision put the earbud in a charging case before putting it in your pocket

  2.  Do not use an abrasive cleaner to clean the Bluetooth earbuds.

  3.  Do not expose the Bluetooth earbuds to excessive temperature.

  4. Do not expose the earbud under the blazing sun for a long time

  5.  Do not let the Bluetooth earbuds be close to the fire source.

  6.  Do not drop, bump, scratch, twist, tap, crush, or put into the water.

  7. Keep away from magnets, appliances, and speakers when using Bluetooth earbuds.

  8. Do not place the Bluetooth earbuds in extreme temperature
    (use ambient operating temperature range -10°C-55°C)

  9. Do not expose the Bluetooth earbuds to moisture.

  10.  If you do not use the Bluetooth earbuds for a long time, please charge it fully and charge it once a week to extend the life of the Bluetooth earbuds.

Safety guidance:

  1. please use the standard 5V charger (4.9-5.5V)
  2.  Do not place the charging case and the Bluetooth earbuds next to the flammable explosives.
  3.  Do not disassemble the charging case and Bluetooth earbuds, or insert other items into the product to avoid damage to the
    product or even cause harm to you.

Serious warning:

Do not use this product while charging. Please use the adapter specified by the manufacturer to charge the product. Do not disassemble the built-in lithium battery. Do not let the metal contact or shorten the electrode. Do not touch or squeeze the battery to avoid Place in a humid or hot (>60 ° C) environment.

Commodity warranty card (warranty details)

  1. From the date of purchase to the warranty period of three months, if the machine fails, the technician will confirm that the fault is under normal use, and free repair and spare parts replacement service will be provided.

  2. The company will refuse to provide warranty service in the following circumstances;
    a.The product has been mishandled, negligently used, or
    accidentally caused by natural disasters and man-made disasters.
    b.The product is repaired and modified by non-technical personnel of the company.
    c.The product body number has been converted, altered, or removed.
    d.The product does not provide installation instructions according to the original factory.

  3. Third, the free service provided by this warranty card does not include product accessories, and other decorations, and other
    items.

  4. The Company will not be liable for any direct or indirect loss of equipment damage.

  5. The contents of this warranty card are subject to change without prior notice.

Warranty Card

The warranty certificate, please fill in and keep it safely

ProductName……………
Sales date……………..
Shop………………..
After-sale service…………..

Packing details:

Item Name

|

Quantity

---|---

Bluetooth earbuds

|

2 pcs

Charger case

|

1 pcs

User manual

|

1 pcs

Certification

|

1 pcs

Eartips

|

3 sizes(Big,Medium,Small)

Use charger line

|

1 pcs

FAQ and Solutions

Phenomenon Failure Reason Solution
Can not turn on / Turn off automatically Low battery Charge the earbuds for

2-5H
No hint after paired| Not paired correctly| Re-paired
Can talk but red light is on| Red light is on for the lower battery| Charge for the earbuds
No lights on
when charging| No output from the power supply| Check the power supply is connected well
Echo| Too large volume or too noisy environmental| Turn down the volume or
change the environmental
There is noise when talking| Environmental disturbance or too far away from the device| Change the environment
to thor mote device near
Low voice| Not wear earbuds correctly| Adjust the position of earbuds
Can not hear
the music| The phone doesn’t support| Need a phone support BT stereo

Brand holder: AMOI science & technology Co., Ltd
Address: The 4th Floor, Guanri Road No.22, software park, Xiamen, Fujian
Manufacturer: Tai Huo Niao Industrial Corporation (Shenzhen) Limited
Address: Room 201, A building, No.1 Qianwan 1 Road, Qianhai
Shenzhen Hong Kong cooperation area, Shenzhen, Guangdong
Service:400-6732-887
Tel:400-7777-525

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals