rapoo XW2K 2K Computer Camera User Guide
- June 6, 2024
- rapoo
Table of Contents
X W2K 2K Computer Camera
Quick Start Guide
Product diagram
- Omnidirectional microphone
- Auto focus HD 2K lens
- Privacy cover
- Flexble Base
- USB Cable
Introduction
This product adopts an imported chip solution to send data to a PC through a USB connector. It can help your family and your friends share happy times through the internet thanks to its high resolution, amazing speed, and exquisite appearance.
Parameters and features
| Lens Type | HYBRID LENS |
|---|---|
| Focus Type | Fixed |
| Field of view | 85 degrees |
| Video Resolution | FHD 1440P / FHD 1080P / HD 720P |
| Auto Light Correction | Yes |
| Built-in Mics | Noise Canceling Double Microphone |
| Interface | USB 2.0 |
| System Requirements | Windows7/8/10 or above, Mac OS X 10.6 or above, Chrome |
OS, and Android v5.0 or above
Mount the camera (set your web camera)
Place your webcam:
Place the webcam where you want it on a computer monitor, desktop, or tripod.
For placement on the Display:
Grasp the webcam as shown and open the flexible/clip base with your other
hand. Mount the webcam, making sure the foot on the flexible/clip base is
flush with the back of your monitor.
Connect the Webcam:
Connect the camera to the computer via the USB interface.
Tip:
- If you use this web camera for connection with a notebook computer or other device through the built-in camera, this camera may conflict with the device’s own camera, so you need to select the camera to be used.
- When using a desktop computer, it is better to connect the webcam to the USB interface on the back of the computer, because this will be much more smooth in use.
Attention
Do not disassemble this product.
Do not use this product in hot, cold, dusty, or humid environments.
Do not touch the lens with hands, sharp objects, or rough objects. Please wipe
with a clean soft cloth.
Try not to throw this product, in order to avoid lens damage, camera failure,
or surface scratches.
Warranty
The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio interference communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
ISEDC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the
permission of Shenzhen Rapoo Technology Co., Ltd.
Declaration of Conformity
We, the manufacturer Shenzhen Rapoo Technology Co., Ltd.
Fax: +86-0755-2858 8555
Declare that the product
Product Name: 2K Computer Camera
Model No : XW2K
Complies with the following norms of :
EN 300 440 V2.1.1(2017-03)
EN 300 328 V2.1.1(2016-11)
EN 301 489-1 V2.2.0(2017-03)
EN 301 489-3 V2.1.1(2017-03)
EN 301 489-17 V3.2.0(2017-03)
EN 50663:2017
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+Al2:2011+A2:2013
The product is in compliance with the essential requirements of Radio
Equipment Directive 2014/53/EU, and the RoHS Directive 2011/65/EU.
Manufacturer/Authorised representative
Kai Guo, Manager
R&D Department
Date of Issue: Aug. 30, 2020
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>