ZOTAC ZBOX C Series Nano Mini PC User Guide
- June 6, 2024
- ZOTAC
Table of Contents
ZOTAC ZBOX C Series Nano Mini PC User Guide
PACKAGE CONTENTS
- 1 x ZOTAC ZBOX nano
- 1 x ZOTAC VESA mount
- 1 x AC adapter
- 1 x Power cord
- 1 x WiFi antenna
- 1 x Quick Start Guide
- 1 x OS Recovery USB Drive (Optional)
CUSTOMIZING YOUR ZOTAC ZBOX NANO
-
Loosen and remove the 4 thumb screws securing the bottom cover.
-
Gently remove the cover.
INSTALLING MEMORY MODULES
-
Locate the SO-DIMM memory slots and insert a SO-DIMM
memory module into the slot at a 45 degree angle. -
Gently press down on the memory module until it locks into
place by the arms of the memory slot.
INSTALLING A HARD DISK
-
Locate the hard disk bracket, remove the screw, and remove the hard disk bracket.
-
Install the hard disk bracket to a 2.5-inch SATA hard disk /SSD with 2 screws.
-
Insert the hard disk /SSD into the socket and gently slide into the connector.
-
Reinstall the screws of the hard disk bracket.
FRONT PANEL
- Power button
- Power LED
- SATA LED
- WiFi LED
- Memory card reader (SD/SDHC/SDXC)
- Headphone/Audio Out jack
- Microphone jack
- USB 3.0 Type-C
- USB 3.0 port
REAR PANEL
- WiFi antenna connector
- LAN (RJ45) ports
- USB 3.1 ports
- USB 2.0 port
- HDMI port
- VGA port
- DisplayPort
- Power input (DC19V)
SETTING UP YOUR ZOTAC ZBOX NANO
- Connecting antenna for Wi-Fi
- Connecting to a wired home network
- Connecting USB 3.1 devices
- Connecting USB 2.0 devices
- Connecting an HDMI display
- Connecting a DisplayPort display
- Connecting a VGA display
- Connecting the power adapter and turning on the system
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>