FUTURE ELECTRONICS M12132 Portable Bluetooth Speaker User Manual
- June 6, 2024
- FUTURE ELECTRONICS
Table of Contents
Specifications:
Bluetooth version:5.0
Rated power: 10W RMS
Frequency response: 20Hz-20KHz
SNR:> 80dB
Battery charging time: 3.5 hours 5V/1A
Music playing time: up to 1 hours (Testing at 80% and 50%
volume with average music sound)
BT received distance: 10M
Power: 10W
Product size (L x W x H mm):9696209mm
Function ：
Bluetooth Music Player/TF card Player/USB Flash Player/
Hands-Free Function/Radio Function
Effective Light Function
Operation:
+/- Button
Short press + : Raise volume
Long press + : Next track
Short press -: Lower volume
Long press -: Previous track
Play Button
Pause/Playback
ON/OFF: Turn on/ Turn off Device
M button: Shift Bluetooth/TF/USB/Radio play model
Light Button: Shift the light model, Long press turns off the light.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>