quietbliss E1 White Noise Bluetooth Transmitter User Manual

quietbliss E1 White Noise Bluetooth Transmitter User Manual

INTRODUCTION

20 Natural Sounds

HELPS IMPROVE SLEEP QUALITY
Features 20 built-in natural sounds including: white noise, pink noise, brown noise, ocean wave, forest birds, fans, rain, water stream, and more.
Choose a sound according to your preference and help, creang a more peaceful environment to fall asleep in, making sure you fall asleep faster and wake up feeling rested.

Built-in Timers

SIMPLE AND INTUITIVE
Includes 5 Built-in mer seng and increments of 15, 30,60, 90 and 120 minutes for you to choose from.

Rechargeable Baery

BATTERY THAT OFFERS LONGER USAGE LIFE
Our sound machine includes a built-in 1000mAh rechargeable polymer lithium baery.

Package Contents

• Machine x1
  

• User Manual x1
  

• USB Type C Cable x1
  

FEATURES

Please note:

• This machine includes a built-in 1000mAh rechargeable polymer lithium baery. Please fully charge it before first use.
• When E1 power on, press the “ Power On/off ” buon to check baery level.

GETTING STARTED – Pairing

Step 1.
Turn on your Bluetooth device and enter pairing mode.
Please Noce: Make sure that your Bluetooth device is in pairing mode to complete this step. Please re-enter pairing mode if should your device meout.

Step 2.
Press and hold the “ Power On/off ” buon unl the power and pairing indicator quickly flash blue three mes to turn on/off E1 device. The indicator will flash slowly aer E1 powers on.

Step 3.
Press and hold the “ Pair Device ” buon unl the power and pairing indicator flashes, E1 will enter pairing mode and will connect to your Bluetooth device automacally.
E1 will start playing music aer pairing is successful and the indicator will then stay on constantly.

Pairing & Time

If your Bluetooth device and E1 have been paired before.

Please turn on your Bluetooth device first. then turn on E1.
E1 will connect to your Bluetooth device automacally. Neither needs to enter pairing mode.
If you turn on E1 first, you will need to tap the “ Pair Device” buon on your E1 to actively search for your Bluetooth device.

When E1 and your Bluetooth device are paired successfully and start working. You can use “ ” or “ ” buon to select song. use “ + ” or “ – ” button to adjust volume. press the “ Play/Pause ” to play or pause.

Timers

When E1 and your Bluetooth device are paired successfully and start working. You can tap the “ Timer ” buon to set a mer for 15, 30, 60, 90 or 120minutes,the ming indicator will turn on green if you have successfully set a mer. Turn off the mer by pressing the “ Timer ” buon unl the ming indicator turns off.

Safety and Warranty

Important Safety Instrucons

• Never drop or insert any objects into openings.
• This device should not be used near water, such as a bathtubs, swimming pools, faucets or basins.
• Disconnect the power supply of the device when it is unused for an extended period of me or when moving the machine.
• Use this device only for its intended use as described in this manual.
• Never operate this device if it has damaged cord, cable or housing.

Warranty

We strive to build our products with the highest aenon to detail and crasmanship. However, somemes there are occurrences of defects and we understand this. As such, we are happy to offer a one-year hassle-free warranty on all our devices as we connue and strive to make amazing products. Please contact us if you have any quesons regarding this.

Specificaons

Model: E1 FCCID: 2AYM8-E1TX
Input: Type C,5V 1A Baery capacity: 1000mAh
Bluetooth5.0 Product Dimensions: 70×70mm
Typical Bluetooth transmit power: 2dBM
Operaon Temperature Range: -10℃ to 45℃
Storage temperature: -30℃ to 45℃

FCC Statement

FCC statement
This device complies with Part 15 of the FCC rules. Operaon is subject to the following two condions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operaon.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modificaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiaon Exposure Statement
This device complies with FCC RF radiaon exposure limits set fort for an uncontrolled environment. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier.

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
  connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by SHENZHEN FUXING TECHNOLOGY CO., LTD may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement:
The device compliance RF exposure requirement and can installed and used without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>