Huaxin Micro Electronics BG02 Smart Audio Glasses User Manual
- June 6, 2024
- Huaxin Micro Electronics
Table of Contents
User’s Manual
Instruction
Great thanks for using our products! Please read this manual before using the product. The contents of the manual are subject to modifications for better service. Modifications due to changes of performance and functionality of the product if needed is without prior notification.
- Product Model: BG02
- Product Name: Smart Audio Glasses
- This product, easy to operate, is a portable bluetooth glasses with stereo sound and elegant appearance.
- Designed and manufactured in China.
Product Parameter:
-
Frame color: black
Lens color: black -
Frame material: ABS+PC
Lens material: PC -
Bluetooth protocol: 5.1
-
Charging time: 2 hours
-
Call duration: 6 hours
-
Music playback: 6 hours
-
Standby: 200 hours
-
Battery capacity: 120mAh*2
-
Charging current: DC5V, 80mA
-
Channel: dual speakers, stereo
Note: 50% volume, the above data come from the laboratory. The actual use time will be different if affected by temperature and volume.
Packing List:
- Glasses* 1;
- Charging cable* 1;
- Glasses cloth*l;
- Glasses case*1;
- Manual* 1;
- Warranty card*1.
Operations:
Tips: To quickly find the touch button, use your finger to slide from the
middle of the glasses legs to the front until touch the button. At this time,
A finger off counted as a click operation.
Separating the legs of the glasses to awake the device, within 5 seconds the
left and right leg of the glasses will automatically match up. Enters
Bluetooth connection mode, which allows you to find Bluetooth devices and
complete the connection.
On/Off
- Separating the legs of the glasses to awake the device, beep “power on”, indicator light blinks slowly.
- Closing the legs of the glasses to shut down the device, beep “power off’, indicator light lasts for 1 second.
- Disconnected to the phone for 3 minutes, the product will automatically power off, beep “power off “.
Bluetooth Pairing Connection
- For first pairing, the left and right lens legs of the glasses will automatically pair within 5 seconds while power on, beep ” pairing” and the indicator light blinks slowly. When connecting with device, the pairing name is BG02.
- When reconnecting to the phone, beep “Connecting”; when successfully connected, beep “Connected”; When disconnected, beep “Disconnected”.
- When no pairing record is found, the device will automatically start searching smartphones. When a pairing record is found, the device connects back to the last phone matched.
Volume Control
Triple-click the right button to increase the volume, beep ” Du “.
Triple-click the left button to decrease the volume, beep ” Du “.
Play Music
- For the next song, Double-click the right button.
- For the previous song, Double-click the left button.
- Pause/ play music, click the left or right button once.
Call Functions
- Provide different tones for different brands and models of mobile phone devices in call reminder service.
- To accept the phone, click the left or right button once.
- To end the phone, click the left or right button once.
- To reject the call, Double-click the left or right button.
Voice Assistant
Long press for 2 seconds left or right button to activate the phone
assistant and voice interaction. ( Backup by mobile phone system. Different
brands and models of mobile phone devices have various functions.)
Charging
- Low battery alarm, beep “Please charge”every 3 minutes.
- When charging, the indicator light flashes slowly. The indicator light is off when charging completed.
- Use mobile phone to check the battery power of the glasses (Backup by mobile phone )
Other
Charging beyond the temperature ( 0°-45°C ) the indicator light blinks 3 times, beep” charging failed”.
Prompts
- Please read the instruction manual thoroughly before using the product. Always include and keep this safety guide.
- Fully charged before the first use.
- When not using the battery pack for extended periods of time(every 2 weeks), please charge before using
- Do not wipe the lens directly, wet the lens first and then use velvet and absorbent eyeglass cloth wiping in the same direction gently. Wiping back and forth or in the circular is not suggested.
Warnings: ****
- Before using, read all the safety information to ensure proper and safe operation.
- Only use a charging cable recommended by the manufacturer or otherwise may cause fire, explosion or other accidents.
- In case of fire, electronic damage or even complete scrap of the product, please do not dismantle or refit the product for any reason.
- Only use the product at ambient temperature between 0°C —35°C and keep the product as well as the accessories at a temperature between -20°C — 45°C for temperature too low or too high may cause functional faults.
- For every time use, please attach the charging cable’s pin connectors to the charging ports found at the bottom of each temple and connect the charging cable to a USB port. After charging, disconnect the power first and then remove pin connectors of the charging cable. Do not directly connect the USB port when the pin connectors don’t connect the temple, which may cause short-circuited and danger.
- When charging is completed, disconnect the charger from the product and the charger from the socket. Do not exceed 12 hours of continuous charging time.
- Always keep the product dry.
- The product must not be disposed of with normal household waste to avoid battery fire or explosion. For packing disposal, please observe the legal regulations in your country.
- This product is with a built-in-non-removable lithium battery, which must not be disassembled, bumped, squeezed or exposed to fire. For any serious expansion of batteries, please stop using.
- Maintain a distance between the product components containing the magnet (the glasses legs and the charging cable) and metal objects to avoid danger of electrical short-circuit which will lead to the overheating of the battery and cause personal injuries such as skin bums.
- The product must not be exposed to or thrown into fire to avoid explosion.
- Do not expose the product to sunlight for a long time to avoid corrosion or deformation.
- Only use the product complying with the relevant laws and regulations, and do not use in the following environments.
- Do not use the product in the vicinity of gas stations, oil depots, chemical warehouses, etc., where flammable or explosive gas or chemicals are stored.
- Do not use this equipment in hospital operating rooms, emergency rooms, intensive care units, etc for the magnetic fields could cause interference with cardiac pacemakers implanted defibrillators (ICDs), hearing-aid, cochlear and other implants. Always keep a at least 15-Centimetre distance to the
- Please consult your physician and the device manufacturer if you want to use this device near personal medical equipment.
- Please do not use the product in an environment that requires special attention such as in traffic, driving.
- Do not use the product outdoors during thunderstorms to avoid lightning
- Do not use the charger in a high humidity area such as a bathroom, as electric shock, personal injury, fire and charger damage may result.
- Please comply with any legal requirements that expressly prohibit the use of the product in any environment.
Do not listen at high volume for long periods of time to prevent hearing damage.
FCC Statement
However, there is no guarantee that interference will not occur in a
particular
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device mustaccept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications
Commission of the United States.
CE Statement
Hereby, declares that the radio equipment type [B002-1] is in compliance with
Directive 2014/53/EU.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
This radio equipment operates with the following frequency bands and maximum
radio-frequency power:
Bluetooth: 20 dBm
Caution
Risk of explosion if battery replaced by an incorrect type.
Dispose of used batteries according to the instructions
RF Exposure Information
This device meets the government’s requirements for exposure to radio
waves.
This device is designed and manufactured to not exceed the emission limits for
exposure to radiofrequency (RF) energy set by Europe. ****
QuickGuide
Instruction| Operation|
Prompt
---|---|---
On
| Open temples|
Power on
Off
| Close temples|
Power Off
Accept Call| Click The Left/Right Button|
End Call
| Click The Left/Right Button|
Reject Call| Double-click The
Left/Right Button|
Play/Pause
| Click The Left/Right Button| Du
Volume+
| Triple-click The Right Button|
Du
Volume-| Triple-clickThe Left Button|
Du
Last Song
| Double-click The Left Button|
Du
Next Song
| Double-click The Right Button|
Du
Voice Assistant
| Long Press The Left /Right Button|
Du
Charging
| –|
Blue LED blink
Fully Charged
| –|
Blue LED stay off
Name and content of harmful substances in products
Part Name
|
harmful materials
---|---
(Pb)
| (Hg)| (Cd)| (Cr6+)| (PBB)|
(PBDE)
Circuit board assembly| 0| 0| 0| 0| 0|
0
Plastic
| 0| 0| 0| 0| 0|
0
Metal
| 0| 0| 0| 0| 0|
0
Battery
| 0| 0| 0| 0| 0|
0
Enclosure
| 0| 0| 0| 0| 0|
0
This form is prepared in accordance with the provisions of SJ/T 11364
O: It means that the content of the hazardous substance in all homogeneous materials of this part is below the limit requirements stipulated in GB/T 26572
The environmental protection use period of this product is 10 years, and the logo is shown on the left. The environmental protection use period of replaceable parts such as batteries may be different from the environmental protection use period of products. The environmental protection use period will only take effect when the product is used under the normal conditions described in this manual.