ISKIL Blast NC-300 Active Noise Cancelling Wireless Bluetooth Headphone Portable Headset User Manual

ISKIL Blast NC-300 Active Noise Cancelling Wireless Bluetooth Headphone

Portable Headset

Welcome to use NC-300 ANC (Active Noise Canceling) Bluetooth headphones. NC-300 utilizes the latest ANC technology, giving you a quiet world; you can immerse yourself and enjoy pure music.

Important Tips for Using This Headphone

1. Before use it, please make sure the headphone is fully charged (refer to Step I).
2. lf you want to use the headphone by Bluetooth, please make sure the headphone is successfully connected (refer to Step II).
3. lf you want to use Noise Cancellation, please make sure ANC is switched on (refer to Step Ill).
4. This headphone is enabled battery protection: even if it’s powered off, you can use it by AUX cable.

Step I Charge the Headphone

Connect this headphone to power by USB cable, the LED light indicates red, the headphone is being charged. When the LED light changes into blue, the headphones is fully charged. The time of being fully charged is about 2 hours.
Tips : Please use SV charger, power bank or other powers to charge the headphone. To charge the headphone In Incorrect way may disable the headphone.

Step II Power On and Connect the Headphone

1. When use this headphone the first time, keep press the MFB button about 5 seainds, when the LED light flashes red/blue, the headphone is ready to be paired. Find NC-300 in “Setting-Bluetooth” in your phone and connect the
   headphone. After being connected, LED light of the headphone flashes 1 time per 5 seainds.

2. lfyou want to connect the headphone to 2 devices:

   • Disable Bluetooth in the phone which is connected to the headphone the first time.
   • Re-do above steps of connecting to connect the headphone to the second phone.
   • Enable Bluetooth in the phone which is connected the first time. Now the headphone is successfully connected to 2 devices.Tips: It’s default that the headphone will stream music from the device which is connect the first time. If you want to play music from the device which is connected the second time, you need to operate it on your phone.

3. lf the headphone is successfully connected and power off, next time it will automatically connect to the connected device when it’s power on (you do not need to connect again). Keep press the MFB button about 3 seconds, LED light flashes blue, the headphone is power on and connected.

4. lf you want to power off the headphone, keep press the MFB button about 3 seconds, the LED light flashes red and then goes off, the headphone is power off.

Step Ill Switch On the ANC

Make sure the power is enough for use, switch on the ANC button, the LED light indicates green, the ANC is enabled.

Step IV Stream Music

You can play music in APP of your phones, choose last/next track, volume+/- etc.
The headphone is of AVRCP function:

1. 1.Make sure the headphone is connected to your phone via Bluetooth, press the MFB button once to stream music from your phone.
2. When playing music, keep press the Volume+ button to switch to last track; keep press the Volume- button to switch to next track.
3. When playing music, short press the Volume+ button to turn up the volume; short press the Volume- button to turn down the volume.

Tips:
• In order to protect ear from being harmed, before use the headphone, please turn down the volume of your phone under 50% After you can adjust to volume as you like.
• If you want to use AVRCP of the headphone, please play music on the phone- shipped APP. For some 3rd party APP, AVRCP would not be supported.

StepV Answer and make calling

When you are using the headphone, if calling comes, the music will be stopped and voice from headphone will remind. you that a calling comes. Press the MFB button once to answer the calling; quick press the MFB button2 seconds to reject the calling. When the calling is under-going, press the MFB button once to end the calling.
lf you want to moke a calling, dial it on your phone. You cal aslo quick press the MFB button wice to call the number which is used last time.

Speclflcatlonofthe Headphone

• Noise-canceling: active
  Version: V5.0

• Profiles: HSP, HFP A2DP, AVRCP

• Wireless range: 10m

• Drivers: 20mW*2

• Playtime: about 17 hours(with ANC); about 25 hours(without ANC)

• Talk time: about 26 hours

• Standby time (Bluetooth only): 45 days

• Battery: built-in S00mAh Li-battery

• Charge time : about 2 hours

• Aux-in: support

• Earpad: over-ear

• iPhone battery indication: support

Packing Contents:

• ANC Bluetooth headphone x 1
• USB charging cable 1
• 3.5mm AUXcablex 1
• User’s manual 1

FCC Statment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>