Rbh Access Technologies RBH-N86-S RFID Proximity Reader User Guide

June 6, 2024
Rbh Access Technologies

Rbh Access Technologies RBH-N86-S RFID Proximity Reader

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig1

INSTALLATION

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig2

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig3

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig4

 Cable Instruction

RED| VIN+ (Power Positive)|

DC 9~24V

---|---|---
BLACK| GND (Power Negative)
WHITE| DATA 1|

Wiegand Cable

GREEN| DATA0
BLUE| Green LED Control / Low Potential
YELLOW| Red LED + Buzzer Control / Low Potential
ORANGE| 485-
BROWN| 485+

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig5

Rbh Access Technologies RBH-N86-S RFID Proximity Reader
fig6

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals