Shenzhen Weile Electronics E1 Motorcycle Wireless Earphone User Manual

Motorcycle Headset
User Manual

Product Introduction

Buttons & Indicator

2-1 Buttons

1. Power button: Long press to power on/off, short press to play/ pause/answer/hang up
2. Mode key: Short press to switch Bluetooth mode/Intercom mode. long press to restart Bluetooth/intercom pairing.
3. Volume+: Short press to increase volume, long press to play next song.
4. Volume-: Short press to decrease volume, long press to play prey song.

2-2 Indicator
1. Blue LED light :
Flashing: Pairing Mode. Solid: Paired successfully.
2. Red LED light: Low power/charging.

Packing List

| | |
---|---|---|---
Module| Module Mount| Charging Cable| Microphone & Speakers
| | | | |
---|---|---|---|---|---
Speaker sticker2| Module sticker1| Microphone sticker*1| Alcohol cleaning pad| User manual| Warranty card

Installation Instructions

4-1 Module Mount Installation

1. Peel the sticker off the module mount and apply it firmly on the left side of the helmet.
2. Place the module slightly below the mount and slide it up, you will hear a click once it is locked in place.
   |
   ---|---

Installation Instructions

4-2 Speaker/Mic Installation

1. Peel off the speaker stickers and apply it inside the helmet.
2. Place the speakers on the sticker.
3. Peel off the microphone sticker, and apply it inside in front of the helmet towards the chin.
4. Bring the wires outside the helmet from under the helmet pads.

Connect the cable into the module.

|
---|---

Installation Instructions

Operation Guide

5-1 Power on/off

1. Power on: Long press the Power button for 2 seconds to power on.
2. Power off Long presses the Power button for 2 seconds to power it off.
3. Charging: Connect the micro USB cable to the charging slot, red light indicates charging, light off indicates fully charged. (charging time<2h)

5-2 Bluetooth Mode

Turn Device On. LED indicator flashes and goes to Bluetooth mode, device waiting for pairing. Search and pair with El Solid blue LED light indicates successful pairing.
5-3 Intercom Mode
Power on two devices, short press M key to switch to intercom mode. After hearing the “intercom mode” prompt, long-press M key of either device, you will hear “paired” suggesting two devices are connected and ready to talk. If two devices have been previously paired, skip the long-press M key process, they will automatically pair with each other.
Interconnect other devices: after entering intercom mode, long press M key to enter pairing mode, and the product will automatically search for other devices for connection; Or initiate pairing by other devices after entering intercom mode (the device shall support the interconnection function of multi- brand products)

Functions

6-1 Music play
1. + Button: Short Press: Volume up
Long Press: Next song
– Button: Short Press: Volume down
Long Press: Previous song
Power Button: Short Press: play/Pause
6-2 Hands-free Calling

1. Pair with your phone.
2. Answer/Hang-up: short press power button
3. Reject calling: long press power button
4. Redial last number: double press power button Long Press M button to activate Voice Command
   Low battery: Suggests device has less than 20% power. (After you heard this audio tip there is about 45 Min reserve battery, the prompt will repeat every 3 minutes if the device is not charged)

Product Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>