VELO DRI-114965 Low Profile Airmover Instructions
- June 6, 2024
- VELO
Table of Contents
Low Profile Airmover Instructions
The Low Profile Airmover produces a high rate of airflow to accelerate the
evaporation of moisture from materials for restorative drying.
READ AND SAVE THESE INSTRUCTIONS
WARNING
For the safe operation of this machine follow the instructions given in
this booklet and the training given by your supervisor. Failure to do so can
result in personal injury and/or damage to the machine and property!
- To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- Do not alter or modify your air mover in any way. Use only replacement parts authorized by the manufacturer. Modifications or the use of unapproved parts could create a hazard and will void your warranty. Contact your authorized distributor for assistance.
- Do not use or store this machine in areas involving fuels, grain dust, solvents, thinners, or other flammable materials and vapors. Do not use flammables to clean this machine.
- For indoor use only. To avoid electrical shock, do not expose the unit to rain, and do not handle with wet hands. Do not immerse or use this unit in standing water.
- Do not pull or carry the unit by the cord, do not use the cord as a handle, and do not close a door on the cord or pull the cord around sharp edges or corners. Keep cord away from heated surfaces. Do not unplug the unit by pulling on the cord. To safely unplug the unit, grasp the plug and not the cord.
WARNING
a) Do not operate any fan with a damaged cord or plug. Discard fan or return
to an authorized service facility for examination and/or repair.
b) Do not run cord under carpeting. Do not cover the cord with throw rugs,
runners, or similar coverings. Do not route the cord under furniture r
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
NOTICE
• Do not obstruct openings or place any objects into openings on the unit.
Keep the unit free from dust, lint, hair, and anything that may reduce
airflow. Keep hair, loose clothing, fingers, and all parts of the body away
from openings and moving parts.
• Unplug when not in use or when moving unit. Turn off all controls before
unplugging.
• Operate unit on a level and stable surface to prevent it from falling and
reduce the risk of possible injury or damage.
• Do not drop or throw the unit. Treatment of this type can cause damage to
the components and create a serious hazard.
• Do not allow children to play with or around the unit. Be sure the unit is
inaccessible to children when not attended.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug and must be plugged into a GFCI-protected outlet.
WARNING: Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the machine. If it will not fit
the outlet, have a proper outlet installed
by a qualified electrician.
WARNING: This product and other substances that may become airborne from its use contain chemicals, including lead and phthalates, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov
MAINTENANCE
Before each use
- Inspect the electrical cord and wiring for damage or discoloration
- Inspect for loose fasteners
- Clean inlet and outlet as needed
- Listen for abnormal sounds
- Keep unit clean
As needed
Use compressed air or a vacuum to remove lint and other debris from the
inlet/outlet grill and motor/impeller. Do not use liquids or a pressure washer
to clean the unit.
TRANSPORT AND STORAGE
Always use the handle to load or carry the unit. Units may be stacked for
transport and storage. When transporting, secure the unit carefully to prevent
sliding and damage to the unit and/or injury to vehicle occupants.
FOR PARTS AND SERVICE CALL YOUR LOCAL JON-DON DISTRIBUTOR.
SPECIFICATIONS
Model| Low Profile Air Mover| Motor Size| ¼ HP| Power outlet| Single (115V)
outlet
---|---|---|---|---|---
Weight| 18.1 lbs. | 8.2 kg| Power| 115V / 60Hz| Cord length| 15 ft. | 4.6 m
Dimensions| 23.6 × 17.9 × 8.8 in.| Sound level| 72 dB (avg.)| Construction|
Injection-molded housing, wire grill. Stackable.
(D × W × H)| 59.9 × 45.5 × 22.4 cm| Control| On/Off rocker switch| Safety| ETL
tested to UL and CSA standards
108992F (AM1030-08)
Documents / Resources
| VELO
DRI-114965 Low Profile
Airmover
[pdf] Instructions
DRI-114965, Low Profile Airmover
---|---