ElanCite REV1-3B Antenna Module User Guide
- June 6, 2024
- ElanCite
Table of Contents
ElanCite REV1-3B Antenna Module
FCC APPROVAL
-
FCC 2-parts warning statement under 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:- (1) This device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Modification statement 15.21
The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC APPROVAL
Warning: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device
WARNING
- RF Emission
Warning: This module contains radio-frequency transceivers and antennas which emits and receive in the 24GHz frequency band. This module can interfere with and its functionality can be impacted by other nearby equipment operating in the same frequency band.
-
Other warnings
Manufacturers of mobile or fixed devices incorporating ANTENNA MODULE REV1-3B modules are authorized to use the FCC Grants and IC Certificates of the ANTENNA MODULE REV1-3B modules for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating, “Contains FCC ID: 2AF46DSPREV1-3B”. Label also mentions “Contains IC ID: 20796-DSPREV13B -
Warning: Changes or modifications made to this equipment not expressly approved by ELANCITE TECHNOLOGIES may void the FCC authorization to operate this equipment
Description
The « ANTENNA MODULE REV1-3B » is dedicated to speed measurement of various
moving objects. Its high-quality antenna permits to mesure speeds with a range
of 250 meters and an average angle of 30° (Azimut and Elevation @-3dB)
Especially studied for cars speed measurement, the firmware offers reliable
and easy to use communication protocol. High quality French manufacturing The
antenna module consists in an antenna for measurements and a high-speed DSP
processor for fast calculation. On board power regulation
For an ease of use : unique connector for power and data.As the product
uses IPS-937 antenna from manufacturer INNOSENT, it is labelled as follow :
Contains:
FCC ID: UXS-IPS937
IC: 6902A-IPS937
Antenna information
The product uses INNOSENT IPS-937 ANTENNA, specs as follows :
FCC ID: UXS-IPS937
IC: 6902A-IPS937
Power specifications
Power source: DC
Power voltage: 9 – 15 (V)
Max power consumption : 2,7 (W)|
See part4 for cable connection specs.
Cable specifications
ANTENNA MODULE REV1-3B uses only one connector for data and power.
Cable connector references ;
BOITIER CST 100 4 PTS
RS : 293 0048
CONTACT ETAME CST 100
RS : 293 0098
Mechanical specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>