iHunt PRO Robot Vacuum Laser User Guide

iHunt PRO Robot Vacuum Laser

Quick Guide

1. Download iHunt Home app from Play Store (Android) or App Store (iOS). After installation open the application.

2. Create a new account using a valid email address. You will receive an email with a validation code. Enter the received code in the application in order to continue the registration. Set a password for your account.
   

3. Press the Add Device button.
   

4. Click on Small Home Appliances and choose Robot Vacuum (Wi-Fi).
   
   

5. Allow the app to access your location and choose a 2.4Ghz WiFi network (the robot cannot connect to a 5Ghz wifi network). Enter the password for the chosen Wi-Fi network. Press Next.
   

6. Turn on the robot by pressing the power button located on side of the device, then press and hold the button on the front of the robot for about 5 seconds
   

7. Choose AP Mode from the top right corner of the screen. Select Confirm the indicator is blinking slowly and press Next.
   

8. In the next screen press Go to Connect. Choose and connect to the SmartLife-XXXX network.
   

9. Wait for the robot to synchronize with the application. Hold the smartphone near the robot.
   

10. After synchronization press Done.
    

11. Open the application to start using the robot.
    

12. At the bottom of the interface you will find all the general functions of the robot.
    

NOTE: Before using the robot vacuum cleaner, place it on the charging station.

Documents / Resources

| iHunt PRO Robot Vacuum Laser [pdf] User Guide
PRO, Robot Vacuum Laser, PRO Robot Vacuum Laser
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>