ELLAS EARS E400 TWS True Wireless Bluetooth Headset User Manual

EARS E400 TWS True Wireless Bluetooth Headset
User Manual

Please read this manual carefully before use and keep it for future reference

PRODUCT OVERVIEW WIRELESS  EARBUDS

PACKING LIST

POWER ON!

Option 1: Take out the earbuds and put them in the charging case. Fully charge both the earbuds and the charging case before the first time using It takes approximately 30 minutes to fully recharger the earbuds.

Option 2: Open the charging case and take the earbud(s) out. Or when the earbud is in power-off status, please touch and hold the touchpad on the left/right earbud for 3 seconds to power on. (The earbuds will Tumon automatically, the earbuds will enter the connection mode.) You will hear a voice prompt of Tower On” from the earbud.

PAIR

Step 1:Turn on the Bluetooth of your Bluetooth device.
Step 2:In the list of found “ELLAS’S EARSaBluetooth devices in your Bluetooth device
Step 3: Choose “ELLAS’S EARS’to pair, you will hear a voice prompt of “Pairing mode” Step 4:If the connection is successful, you will hear a voice prompt of “Connected” from the earbuds.

WEAR

Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth.

CALL

Answer a call Tap the Touchpad of ether ea thud once

Reject a call Tap and hold the Touchpad for either earbud for two seconds

Note: Switching between the earbud and the phone, please also keep the ea• in contact during the call

MUSIC

Play / Pause / Previous / Next Play / Pause: Tap the Touchpad of either earbud once.( Some phones need to open the media player. ) Previous: Tap the Touchpad of the Left (L) Earbud Three Strikes. Next: Tap the Touchpad of the Right (R) Earbud Three Strikes.

Citations

1. If music is playing when you call, the earbud will automatically y play music after the call ends.
2. If the voice assistant is used, the music will be paused

CHARGER

The explanation of LED Indicators

1. The light shows white flashing when charging
2. Flashing red light when the battery is below 30%
3. The indicator light I s always orviaen fully charged (white light)

Multiple charging methods

POWER ON

Manual operaion

1. 0pen the charging case and take the earbud(s) out.
2. Tap and hold the touchpad on the left/right earbud for 3 seconds to power on You will hear a voice prompt of Tower On” from the earbud.

Automatic operation
Open the charging case and take the earbud(s) out. the earbud will power on automatically, with a voice prompt of Tower On”

POWER OFF

Manual operaion

1. Tap and hold the touchpad on the left/right earbud for 5 seconds. You will hear a voice prompt of “Power On” from the earbud.
2. Aftertitieeseatiniatisseceotlosed, put their rtfaatfir the headphone case and dose the cover.

Automatic operation

1. Put the earbud(s) back into the charging case and close the case.
2. Earbud(s) automatically turns off (and enters charging mode).

VOICE ASSISTANT

Step 1:Tap the Touchpad of either earbud for 2 seconds to wake up the voice assistant, you will hear a voice prompt of “Power On”
Step 2: The conespor ding voice assistant screen will pop up and you can easily give commands.

Tips You may try out the fol Howitt commands

RESET

When two “Ella’s ears” pairing names appear in the phone list at the same time, only one earbud has sound when connected to Bluetooth, which means the left ear and the right ear have lost the pairing, please follow the following:

1. Delete the device and turn off the Bluetooth device;
2. Single headset on, hear “pairing mode” after 5 consecutive quick click touch keys, hear “clang, the shutdown”, the headset reset successfully, the other one also the same operational; After the two earbud(s) reset

successfully, close to the self-connection, and then open the phone after the successful Bluetooth connection device.

PRODUCT PARAMETERS

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>