Rebel NAR0465 Magnifier Lamp User Manual
- June 6, 2024
- Rebel
Table of Contents
Rebel NAR0465 Magnifier Lamp User Manual
SAFETY INSTRUCTIONS
Read the instruction manual carefully before first use and keep it for future
reference.
Producer is not responsible for damages caused by inappropriate handling and
use of the device.
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
- Protect power cord from sharp edges and other factors which could lead to their damage.
- The power mains socket must be located near to the device and be easily accessible.
- Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
- If the device is not being used, disconnect it from power supply.
- When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
- Do not handle the device with wet hands.
- Always cover the lens with the hinged lid when not in use. Otherwise there is a risk of fire during direct sunlight since the lens acts like a burning glass.
- Do not touch the lens with with sharp or pointed objects.
- Do not look directly into the light beam!
- Never point the beam of light at persons or animals!
- Never point the beam of light at mirrors or other reflective surfaces.
- Do not attach any objects (e.g. decorative material) to the device.
- The device is suitable for indoor use only.
- Use only authorized accessories.
- Do not use the product for purposes different from displayed in this operating manual.
- Do not use the device if it is damaged.
- Do not attempt to repair this device yourself. In case of damage, contact with authorized service point for check-up or repair.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.
- Fixed power cable may only be replaced in an authorized service point.
- ALWAYS disconnect the device from the power source before cleaning.
- Clean this device with soft, dry cloth. Do not use any abrasives or chemical agents to clean this product.
INSTALLATION
- Attach the vise to the tabletop in such a way that the table touches the inner part of the vise.
- Tighten the clamping screw firmly until the vise sits properly and cannot be moved.
- Insert the foot of the lamp arm into the opening in the vise.
OPERATION
- Connect the plug of power cord into the power mains socket.
- Open the lamp lid.
- Set the lamp switch to I position to turn on the light.
- Position the arm according to your preferences.
- Set the tilt angle of the lamp head with a screw on the end part of the arm.
- When you finish using the device, set the lamp switch to 0 position and close the lid.
SPECIFICATION
Lens: Glass
Lens size: 5”
Optical power: 5 dioptres
Light source: 60x 2835 SMD
Luminous flux: 900 lm
Color temperature: 6500 K
Efficiency: 90 lm/W
Power: 10 W
Adjustable swing arm for easy positioning
Heavy duty metal G-clamp
Mounting: To the table
Color: White
Lifespan: 20 000 h
Humidity: =< 95%
Power supply: AC 220 – 240 V; 50 Hz
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or Its literature,
indicates that It should not be disposed with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>