Sandberg 420-64 Survivor Powerbank 7in1 72000 User Guide

Survivor
Powerbank
7in1 72000
Quick guide
420-64
www.sandberg.world

Overview

1. USB-C 1 Input/Output
   

2. USB-C 2 Output
   

3. USB-A Output
   

4. DC Input/Output
   

5. Laptop voltage indicators
   

6. Power button
   

7. Battery level indicator
   

8. Wireless charging Area
   

9. 12V Car lighter output
   

10. Flashlight and emergency light
    

11. Laptop Voltage button

Detailed specification

Charge the power bank

Charge mobile device (USB and USB-C 2 Output)

Charge equipment (Car Lighter Socket)

Charge laptop (DC or USB-C 1 Output)

1. Choose the correct tip to fit the DC port of your laptop.
2. Set the correct voltage on the power bank:
   Keep a long press on the button until the display is flashing.

Click button short to step between Voltage 12V/16.5V/20V/24V.

3. Connect the laptop, the charge will start.
4. After disconnecting the laptop, you need to set the Voltage next time.
   For safety, it will always start the cycle at the lowest setting 12V.
   NOTE : If you are in doubt on what DC-Voltage to choose, have a look at the label on the AC charger for the laptop.

Wireless charger

Flashlight and Emergency light

Flashlight and Emergency light

Support
http://helpdesk.sandberg.world
Warranty
There is a five-year warranty on your Sandberg product.
Please read the warranty terms and register your new
Sandberg product at www.sandberg.world/warranty

5 Years Warranty

For information on handling electronic waste, see www.sandberg.world/weee

References

• Helpdesk - Sandberg A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>