Shanghai Laisi Information Technology 2021AG Smart Rope User Manual
- June 6, 2024
- Shanghai Laisi Information Technology
Table of Contents
2021AG Smart Rope
User Manual for the Smart Rope
Thank You for Buying the 75PAI Smart Rope. This manual shows you how to use the smart rope. Please read this manual carefully before using the product and keep it properly.
I. Download Paiactive
APP Search and install the APP.
II. Device Binding
- Turn on Bluetooth on your cellphone
- Open the Paiactive APP to register/login, and then add “Smart Rope” in “Device-Add Device”.
III. Buttons & Charging
- Activate the Device: a short press on the left/right button to activate the device.
- Switch the Mode: a long press on the left button for 2 seconds to switch the mode.
- Reset the Mode: a long press on the right button for 2 seconds to reset the mode.
- Restart the Device: a long press on the right button for 8 seconds to restart the device.
IV. Display
- Battery icon: it shows the current battery status; when the icon flashes, please charge the device.
- Exercise mode: it shows the current exercise mode, which includes free mode, time down (skipping time) and count down (skipping count).
- Time: it shows the skipping time or remaining time.
- Count: it shows the count of skips done or the count of remaining skips.
V. Installation
Daily maintenance and matters need attention:
- This product is not waterproof, so do not use it outdoors in rainy days.
- Please use a piece of dry cloth when wiping the handles. Don’t use a wet one.
- Please carefully evaluate your fi condition and have a warm-up before your start rope skipping,
If the device doesn’t work, please try the following:
- Please make sure the device has enough power.
- Check your cellphone to make sure the Bluetooth is on.
- Turn off the Bluetooth and turn on it again on your cellphone.
- Restart your cellphone.
- Restart the device and rebind it to your phone.
Product model: LS-T30L
Color: Gray/White
Handle size: 1702323mm
Weight: About 170g
Material: ABS. Silica gel;
Rope length: 2.8 meters
Connectivity: Bluetooth
Battery capacity: 70mAh
OS support: Andriod5.1 , iOS 9.0 and above
Manufacturer: Shanghai Laisi
Information Technology Co., Ltd. Address: No. 1158, Zhongxin Road, Songjiang District, Shanghai
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment