NEXTRON HT-500 Soundbar For TV with Built-In Subwoofer User Guide

Quick Start Guide
HT-500/HT-500-MAX

Please read this guide before setting up and operating your new product.

Remote control

To set up the remote control (Battery not included)

Desktop placement

• Wall-mounting is not supported.
• Do not place any objects on the top of the soundbar speaker.
• Do not place metal objects around the system. Wireless functions may become unstable.

Connecting a TV with an HDMI IN jacks labeled “eARC” or “ARC”

• Do not connect to any HDMI port on your TV without an “eARC” or “ARC” label.
• Full compatibility with all HDMI-CEC devices is not guaranteed.

Connecting a TV without any HDMI IN jacks labeled “eARC” or “ARC”

Choose one of the following connection methods according to your TV jacks.

• Choose only one connection method at a time.
• Make sure that the connection is selected as an audio source on the Soundbar.

Turning on the TV

Power-on/Auto standby/Auto wakeup

1. Connect the soundbar to power by using the supplied AC/DC adapter.
2. On the soundbar, press to power on or switch to standby mode.

• The soundbar will wake up or turn off automatically with the TV when connected to your TV through the HDMI eARC/ARC connection.

Setup for HDMI ARC and Optical connections

You may need to do the following simple checking and settings on your TV with HDMI ARC or Optical connection:

1. When the TV and the soundbar are connected via an HDMI cable, enable the Control
   for HDMI function or the eARC/ARC function on the TV. For details on the TV’s settings, refer to the operating instructions supplied with the TV.

2. Check the sound setting of the TV. When the TV is set to output the sound from the TV speakers, change the setting to output the sound from the external speakers.

3. Set the audio format on your TV to the PCM 2 channel (not Dolby).

• Without the above-mentioned checking and settings, you may get no sound from your soundbar via HDMI or Optical connection.

Troubleshooting

No TV sound is output from the soundbar.

• Press INPUT on the remote control of the soundbar repeatedly to select
  the connected input.

• Disconnect the cables that are connected between the TV and the
  soundbar, then connect them firmly again. Disconnect the AC power cords of the TV and the soundbar from the AC outlets (mains), then connect them again.

• When the TV and the soundbar are connected via an HDMI cable or optical cable, do the checking and settings as mentioned in chapter 7.

The TV remote control does not work.

• When the soundbar speaker obstructs the remote control sensor of the
  TV, the TV remote control may not work. In that case, relocate the soundbar and/or your TV.

Always there to support you

Need help? Contact Nextron:

Email: support@artmosint.com
Amazon Buyer-Seller Messages: Go to Your Orders then find your order in the list,
click the Nextron Electronics link below the product title, click the Ask a Question button.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>