VIVITAR VIVCLFL60 Full Color LED Light User Guide

Smart led Floodlight

Product Parameters

About wiring

Remember the ground wire to be connected,so as not to cause electric shock in the product immersion in the rain.
Plug directly into the socket can be powered to use For your safety, please install under professional guidance. Please Make sure the power is off before wiring.

IP Grade-IP66

| Dustproof Level| Waterproof Level
---|---|---
0| No protection| No protection
1| Prevent the invasion of large solids| There will be no effect on housing if drip drops into it.
2| Prevent the medium size so lids from invading| When the housing tilts to 15degrees, there will be no effect on housing if drip drops into it
3| Prevent the small solids from invading| There will be an effect on housing if water or- raindrops into it from 60 degrees.
4| Prevent the solid which is greeter than 1 mm from invading| There will be no damage on housing if throw the liquid to it from any directing
5| Prevent harmful dust from accumulation| There will be no any damage if washing with water
6| Compieteiy prevent dust from entering| Can bused in the cabin environment
7| | it can be soaked in water for a short time
8| | Under certain pressure, it can be soaked in water for long

If you don’t know the protection level, please to the chart, the third(IPXX)for dust level, the fourth (IPXX) for waterproof level.Do not soak the lamps with insufficient protection underwater for a long time!
Placement and installation method
Instructions before installation:

1. Arrange all kinds of parts for supporting lamps.
2. Check the input voltage, power, and other parameters of the lamp carefully before installation.
3. Make sure the power is off before installation.
4. Make sure that the core of the external power line does not leak out when wring.

Installation Diagram

APP download

The public version of the APP has now been released to mainstream APP stores around the world.
You can search “Shine Light” in the APP store, or scan the qr code below to download it.
IOS: iOS Appstore in China and overseas
Android: Google Play, etc., continue to increase

http://120.25.194.109/files/down/CShine/index.html

Device default pairing guidelines：

1.  After downloading the APP, register an account in us domain to use it. The mobile phone needed to open the Bluetooth function.

2. Enter the password of the current connection router (the user can manually switch the connected router), click the next step to start the network distribution, and confirm whether the device is in the state of network distribution.

3. After successful network distribution, it will automatically jump to the details page of the device.The control test can be performed at this point.

4. Note:
   If you can’t search your Bluetooth bulb device or can’t connect with the Bluetooth lamp device for a long time, please enter your phone ‘setting’ and connect again;
   If you can’t connect to the device for a long time or other abnormal,please close the APP,then try to restart;
   Do not put the product in a closed lampshade;
   Do not put the product in a place that is humid or has water;
   Keep using it under the power supply of 12V DC,50-60Hz;
   This product is not a toy and keeps it untouchable to children;
   Do not put the product on the high-temperature surface;
   Do not open any sealing device for safety and according to Warranty Terms;

 FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules, the operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>