CARL THE SLEEPY ROBOT 4712805623006 Calming Device To Make The Newborn Sleep User Manual
- June 6, 2024
- CARL THE SLEEPY ROBOT
Table of Contents
THE SLEEPY ROBOT 4712805623006 Calming Device To Make The Newborn Sleep
User Manual
Warnings for use
Thank you for purchasing CARL THE SLEEPY ROBOT®. CARL is a device that
facilitate your baby sleep with the same effectiveness of a car ride. It’s
practical and versatile: it can be attached to most children’s care facilities
with its adjustable clamp, inside and outside your home.
IMPORTANT
- Read this user’s manual very carefully.
- CARL THE SLEEPY ROBOT® is not a toy.
- CARL THE SLEEPY ROBOT® is not a medical device.
- Keep the clamp out of the reach of children.
- After use, remove the device from the clamp and store it in a safe place.
- Adult supervision is required. Do not leave the child unattended.
- the device must be assembled and used by adults only.
- The device has not been tested for use with sensitive monitoring equipment (ICU devices).
- Carl is a device designed to promote baby sleep, in no case should be intended as a tool to solve diseases.
- In the presence of pathologies, the use of the device is recommended upon appropriate medical advice.
- In case of abnormal functioning, turn off the device and contact the customer assistant through the site www.takecarl.com
The device needs to be charged before the first use.
CAUTION
For safety reasons, the device should not be turned on and used while
charging. Once the front LED light turns green unplug the power cord and then
turn on the device, otherwise you may cause damage
Warnings for use
Contents of the box
How to assemble CARL
Attach the clamp to the stand
- Open the clamp by turning the red knob anti-clockwise.
- Insert it on the support (crib, stroller, infant carrier, etc …) in the desired position.
- Tighten the clamp making sure
- that the grip is firm. The rubbers guarantee an excellent adherence to the support and protect surfaces from scratches.
Suggested dimensions min Ø 25mm, max Ø 40mm. The holder does not have to have
a circular cross section.
For an easier placement of the clamp on the support it is possible to unfasten
the lower part, screwing it back after the insertion.
Hook the device to the clamp
- Align the device vertically over the clamp socket
- Press down and make sure it is properly inserted
IMPORTANT
Make sure that the clamp is properly attached to the holder before turning on
the device. Then check the grip regularly.
Usage specifications
ON/OFF
To turn the device on or off, press and hold the button for 2 seconds. Once it
is turned on, the device is automatically set to L1 (light) and M1 (vibration)
modes. Press the and buttons to select the desired modes.
Each cycle has a duration of 40 minutes, after which the vibration can be
restarted by pressing the button or simply by turning the device off and on.
LIGHT
BATTERY charge indicator
Each time the device is turnedon, a LED light lights up for a few seconds to
indicate the battery charge status.
Green LED battery sufficiently charged
Red LED battery needs to be recharged
Usage specifications
LIGHT Adjustment
This button allows you to choose between these modes:
L1 soft variations of light
L2 fixed light
L3 light off VIBRATION adjustment
This button allows to choose between these modes:
M1 vibration at fixed speed, approx. 1000 rpm
M2 vibration at fixed speed, approx. 1125 rpm
M3 vibration at fixed speed, approx. 1250 rpm
M4 vibration at fixed speed, approx. 1375 rpm
M5 vibration at fixed speed, approx. 1500 rpm
M6 vibration at variable speed between approx.1000 rpm and 1250 rpm
M7 vibration off
CAUTION
Do not switch on the device while it is charging
USB input (RECHARGE)
To charge the device remove it from the clamp and insert the supplied cable.
You can recharge the device by connecting it to the USB sockets of your PC or
by using the charger of any smartphone (3 to 7W, no fast charging). The
battery lasts more than 6 hours (tests carried out with fixed light L2 and
vibration mode M3).
Recommendations for use
Main supports suitable for CARL
Recommendations for use
Advices for a correct use
In order for the device to function correctly, once it’s turned on check
wether the vibrations are transmitted to the surface holding the baby. If not,
change the device position. This precaution applies to all types of supports.
The device can also be used without a clamp. In this case, place it directly
on the mattress or on the desired surface (bouncer, infant carrier, etc.).
CARL THE SLEEPY ROBOT® is a versatile device suitable with most placement.
Other advice for correct use
CARL THE SLEEPY ROBOT® is a device that facilitates the falling asleep
phase. For an effective result, use the device once your baby is ready for
bed.
The device does not feather WiFi and Bluetooth connections so it can be used
with complete peace of mind next to your baby.
Made in Taiwan Imported and distributed by
DB srl – Via Trieste, 9/5 33044 Manzano (UD) – Italy
takecarl.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>