tp-link M73504G LTE-Advanced Mobile Wi-Fi Device Installation Guide

Quick Installation Guide
Mobile Wi-Fi

* Images are for demonstration only.
Screen Display

The screen display will automatically turn off after being idle for a while. To turn it on again, press the or MENU button.

Install the SIM Card and Battery

a. Remove the back cover.| b. Install your SIM card.| c. Install the provided battery.| d. Replace the back cover.
---|---|---|---

Connect to the Internet

a. Power on the Mobile Wi-Fi.
Press and hold the Power button until the welcome screen appears.

b. Connect your smart device to the Mobile Wi-Fi.
To view the SSID and password, press the MENU button to switch to the Device Info icon, then press the Power button to enter the screen.
Enjoy the internet!

• If you cannot access the internet, refer to FAQ > Q1.
• By default, Power Saving is enabled and the Mobile Wi-Fi will turn off Wi-Fi when no wireless devices are connected to it for 10 minutes. To resume the Wi-Fi connection, press the or MENU button.

Managing Your Mobile Wi-Fi

Manage your Mobile Wi-Fi using any of the methods below. You can customize Wi- Fi settings, block Wi-Fi devices and more.

tpMiFi App

1. Get the tpMiFi app from App Store or Google Play, or by scanning the QR code.

https://www.tp-link.com/app/qrcode/?app=tp-mifi

2. Connect your wireless device to the Mobile Wi-Fi.
3.  Launch the tpMiFi app and create a password to log in.

Web Management Page

1. Connect your wireless device to the Mobile Wi-Fi. If it is a computer, make sure it is set to obtain an IP address automatically.
2.  Launch a web browser and visit http://tplinkmifi.net or http://192.168.0.1.Create a password to log in.
   For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

 http://www.tp-link.com/support

Charging Your Mobile Wi-Fi

Method 1
Via a Wall Outlet (Recommended)| Method 2
Via a Computer
---|---

• When on the battery icon disappears, the Mobile Wi-Fi is fully charged.
• The power adapter is not provided by TP-Link.

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the internet (one of the following messages appears on the home screen)?
A1. PIN Required

• Your SIM card is PIN protected. Log in to the web management page (http://tplinkmifi.net) on your phone, then enter the PIN provided by your mobile carrier.
  A2. No SIM Card

• Power off the Mobile Wi-Fi and reinstall your SIM card.
  A3. No Service

• Verify that your SIM card is an LTE or WCDMA SIM card.

• Verify that your SIM card is in your carrier’s service area and has sufficient credit.

• Log in to the web management page (http://tplinkmifi.net) on your phone. Go to Dial-up, tap View profile details, and verify that the parameters (i.e. APN, username and password) provided by your mobile carrier are correct. If they are not correct, return to the Dial-up page and create a new profile with the correct information. A4. icon

• Enter the Menu screen, go to Data Roaming, and turn on Data Roaming. Q2.
  How do I restore the Mobile Wi-Fi to its factory default settings?
  A. With the Mobile Wi-Fi-powered on, remove the cover, then use a pin to press and hold the Reset button until “Power Off” appears on the screen.
  Note : Restoring the device to its factory defaults will clear all your settings.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.
  CAUTION!

• Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

• Avoid the disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.

• Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. Do not leave a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  CAUTION!

• Risk of explosion if the battery is replaced by an incorrect type.

References

• Trying to configure the MiFi? | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>