Runhu Toys Factory S5X1 Remote Control Boat Instruction Manual

Remote Control Boat
2- 4G Durable Remote Contral Racing Goat

*Please read this manual carefully before operation and keep il propery for future reference.

INSTRUCTIONS FOR BEGINNERS

1. When in the water, the RO boat will automatically conduct and connect to the remote contender.
2. Always keep the RC boat within the range of 50 meters to avoid control loss.
3. The RC boat can run for up to 20 minutes. recovery fun clon. Please pay attention to keep the boat from capsize or sinke that may result in capsize.
4. Please keep the boat from objects such as waterweeds to avoid being trapped.
5. You can manually adjust the direction,

KNOW YOUR SPECTRE BABY SHARK

Tha S series RC Boat applies 2.4G remote control system to enable multiple players to compete without interference. The remote controller allows for multiple functions, such as racing, sailing in different directions (forward backward left and righ} and fine-tuning, bringing you a thrilled expenenca.

ACCESSORIES

Notes:
Please check the number of accessories carefully (as shown above). Please provide proof of purchase and contact the store for replacement if any missing parts.

KNOW YOUR REMOTE CONTROL

1. Operation Board of Remote Control
   1. Antenna
   2. Left/Right| 3. Power Switch
   4. Forward
   ---|---

Steering Rudder

2. Battery Assembly for Remote Control

3. Open the Remote Control Battery Cover

4. Assemble Batteries for Remote Control

Open the cover of Battery compartment, insert two AA batteries (not included).

Notes:

1. Ensure the polarity symbols on the batteries match the symbols inside the battery compartment.
2. Do not mix new and old batteries.
3. Do not mix different types of batteries.

BATTERY CHARGING AND ASSEMBLY FOR RC BOAT

1. Battery Charging for RC Boat
   A: Plug the USB charging cable into the computer socket at one end.
   B: Connect the USB Charging cable with the battery at the other end.
   Notes:
   Caution: Charging time is about 90 minutes. Using time is about 20 minutes. The LEO Light will ba GFF when charging and red LED light will be “ON” when fl is fully Charged.

2. Battery Assembly for RC Boat
   

3. Insert the battery into the RC boat, and click in the battery base with the battery connectors connected correctly.

4. Insert the hatch at a full 45 degrees and push it firward to refit it.

Battery Instructions

• There is a certain risk when using battery. Il may cause fre, body injury, or property loss. Users must be aware of ihe risks and take full responsibility of using battery improperly.
• If battery leakage occurs, please avoid contacting your eyes or skin with electrolytes. Once it happens,.please wash your ayes wilh clean water and seek madical care immediately.
• Please remove the plug immediately if you sanse any peculiar spall, noise or smog.

Battery Charging

• Please use the charger fram onginal factory to ensure your sale usage.
• Do nol charge dilatant or outwom battery.
• Do not over charge battery. Please unplug the charger once fully charged.
• Do not charge the battery next to inflammable, such as carpet lumber floor or wood furniture oF on the surface of elactro-conductive objects. Please always keap an ayé on the battery when charging.
• Do not charge battery which not cool down yet.
• The charging temperature should be between 0°C to 40°C.

Battery Recycling

• Do not dispose of the battery as dally rubbish. Plaasé familiarize yourself with the local garbage disposal method and dispose it according to the special requirement.

OPERATION WITH REMOTE CONTROL

1. Forward

2. Turn Left/Right
   

3. Navigation Rudder
   When it yaws left, manually adjust the direction to right and vice Versa.

**IMPORTANT**

• This product is not categorized as toys or playthings. It is applicable for users aged 14 and the above, For users under the age of 14, a parent or legal guardian shall company and supervise the child’s use of this produc at all times.
• Please do not charge Dattenes, which are not cool down yet.
• Ensuré no people in the water before shipping the RC boat otherwise it might cause potential accidents, Be aware ff there are any plants, objects, or obstacles in the water body, since they might be sucked of caught up in the rotating propellers and cause damages to the RC boat.
• Please operate the RC boat within a range 50 meters in distance in case of control loss.
• This product includes small and tiny components, which might cause suffocation if swallowed.
• Please do not swallow any included components.
• Please keep distance from the propellers particularly when they are rotating at to avoid injury.
• Please do not touch the motor in operation of soon after it stops to avold Severe burns.
• According to electromagnetic environment requirements for aviation radio (stabon), this product is sinctly prohibited by the airport runway 3% the cantar of a circle with radius of 5,000 meters.
• Please do not use this product where and when the radio communication is regulated by the authority.
• Please inspect the USS cable and other components regularly. if any damages are found, please slop using and restore or replace with a new One.

MAINTENANCE

1. Remove the battery when the RC boat stops running.

2. Avoid the RC boat exposure to strong sunlight to protect the paint.
   Use a piece of soft and dry cloth to clean the RC boat afler every use.

3. If the RC boat is left unused for a long period,remove the battery to avoid leakage, which results in damage to the remote controller.

Notes:
Use a piece of soft and dry cloth to dean the RC boat after every use. And put a desiccant pack in the boat to avoid moisture and humidity.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>