Shenzhen shixinhaikejifazhanyouxiangongsi SW06 Smart Watch User Manual
- June 6, 2024
- Shenzhenshixinhaikejifazhanyouxiangongsi
Table of Contents
SW06 Smart Watch
User Manual
Please refer to this manual before using the product. V1.0
Notes:
- The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in different software versions.
- Please charge the smartwatch with configured charger for no less than 2 hours before use.
- Please install and connect to the suggested App and set personal information before use. Please refer to the below guidelines and use the smartwatch properly.
Wearing method
Please wear the device on your wrist horizontally, about one finger from the carpal and adjust to a comfortable position. Below picture for reference. Note: Please wear the device a bit tighter when making heart rate testing.
Download App and Pairing
-
Long press the power button to turn on the device, slide down from the main interface, open setting- App Download, and use the mobile phone to scan the code. Or you can also scan below QR code or search for “GloryFit” in the App store.
https://app.help-document.com/gloryfit/download/index.html -
Open the App and BT, search and select the corresponding device on App as guided.
Notes:
1. Please keep BT on during paring to ensure a successful connection.
2. Please long press power button 3s to reboot the device if couldn’t find
the device during paring. Or choose reset on the device and search the device
again.
Operation
a.Shortcut Setting Page: Swipe down from homepage.
b.Message: Swipe up from the homepage.
c.Main Menu: Swipe right from the homepage.
d.Function Shortcut Interface: Swipe left from the homepage.
e.Watch Dial Setting: Long press dial for 3s and slide left or right to
choose.
f.Power ON/OFF: Long press power button for 3s to power on; From the home
page, long press power button 3s, and tap to power off.
g.Return Previous Menu/ Screen On or Off The press power button.
h.Sports Shortcut key: Press the below side button to quickly switch to the
training interface.
Functions
Training: 13 sports modes Running, Walking, Cycling, Climbing, Spinning Bike, Yoga, Skipping, Gymnastic, Badminton, Ping-pong, Boating, Sit-ups, and Free training. Sports records are visible on the App.
Pedometer: Record daily steps, distance, and calories. Historical data are visible on the App.
Heart Rate Monitor : Click and show real-time heart rate. Autotest opens
on App. Intermittent automatic detection generates a histogram, interval unit
is 10 minutes. Historical data and analysis are visible on the App. Blood
Oxygen Monitor: Test the blood pressure. Historical data and analysis are
visible on the App. (Data cannot be used for medical purposes)
Weather: After connecting with App, Show daily weather and the next 4
days’ weather forecast. Sleep Monitor: Record daily sleep time and deep or
light sleep duration. History records are visible on the App. BT Music
Control: Remote control the music player of mobile phone, Play/ Pause/
Switch to previous or next song. Message : Notifications push sync, show 8
latest messages on watch. Turn on/off SMS reminder and SNS App reminder on
App.
More: Find Phone, Stopwatch, Timer. Settings: Power off/ Reset/ Brightness /Dial / App download/ About the watch.
Other functions
Sedentary reminder, alarm clock reminder, low battery reminder, incoming call reminder, find watch, find hand Machine, online dial/custom dial, 12/24 time system, unit sets, wrist light up Screen, menstrual cycle reminder, goal achievement reminder.
Charging
-
Connect the charging cable to the charging port of the watch and make sure that the metal pins are fully connected. If the charging cable cannot be connected to the magnetic metal contacts of the watch, please turn the charging cable over to reconnect and charge.
-
Please use a 5V 1A charging adapter to charge the watch.
Note: If the smartwatch cannot be turned on after a long period of non-use, or the smartwatch cannot be charged, please check whether the charging metal pins of the watch are blocked by dirt, please clean it up and make sure the connection is good.
Warranty
-
When this product is in normal use if it is caused by manufacturing, material, design, etc. Product quality problems from the beginning, from the date of purchase, the motherboard is guaranteed for free within one year. The battery and charger are guaranteed for half a year.
-
The free warranty is not provided for failures caused by the user’s personal reasons, as follows:
1). Failure caused by unauthorized disassembly or modification of the watch.
2). Failure caused by accidental fall during use.
3), all man-made damages or due to the third party’s fault, misuse (such as: water in the host, external shock Cracks, scratches on peripheral components, etc.) are not covered by the warranty. -
When the user repairs the product, please contact us for warranty service.
-
All functions of the product are based on physical objects.
Tips:
- In order to ensure the waterproof performance of the product, please do not remove the screws on the back cover of the watch without authorization,or soak in hot water, hot tea, and other corrosive liquids.
- This product contains lithium batteries. When recycling the product, please be sure to put it in the designated battery recycling point.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that
may cause undesired operation.
FCC ID: 2A4QK- SW06
Warranty Certificate
Client Info|
Product Type| | Vendor| (Stamp)
Client Name| | Contact Info|
Vendor’s Contact| | Purchase Date|
Product IMEI Code|
Client’s Address|
Vendor’s Address|
Warranty Record
Date| Problems| Diagnosis| More Info
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>