Dongguan Jieshengda Intelligent Technology T10 Wireless Audio Adapter User Manual
- June 6, 2024
- Dongguan Jieshengda Intelligent Technology
Table of Contents
**Dongguan Jieshengda Intelligent Technology T10 Wireless Audio Adapter User Manual
**
Welcome to use wireless audio adapter, this product chip has built-in enhanced signal sending circuit, fast connection, long distance, stable and continuous sound, chip built-in AEC echo and ANC elimination circuit, pure sound quality, make your use more convenient and fast. The product is easy to operate and is free to send/receive all audio. This product allows you to make TV/CD player/ MP3/speaker/car radio or anything else that is audio on your device.
Packing Accessories
Wireless Audio Adapter: 1 PCS
3.5MM audio cable: 1PCS
Neutral Instruction Manual: 1 PCS
Instructions
Interface schematic diagram:
Note: connect antenna with device before using.
Functions
The product is powered on by default in the transmit mode, the red indicator light flashes quickly, long press the function key to switch to the receiving state, and the blue indicator light flashes rapidly.
Pairing steps
A: Launch mode:
- Plug the device into the USB port to supply power (such as TV, computer, mobile phone charger on the USB charging port), the device will automatically turn on, the device lights red and flashes quickly, that is, enters the wireless search state;
- Insert the 3.5MM audio cable into the 3.5mm audio port on the device, and insert the other end of the audio cable into the audio output interface of the computer, TV, projector, mobile phone, tablet, MP3, CD player, etc. : the device’s headphone output interface);
- Turn on the audio receiving device (such as wireless headset, wireless speaker, etc.) to the pairing state, the device will be paired automatically, the pairing is successful, and the red indicator light is always on;
- If it is not the wireless device you want to connect to, you can quickly search for the next wireless audio receiving device by briefly pressing the function button on the device.
B: Receive mode:
- Plug the device into the USB port for power supply (5V USB interface), the device will automatically turn on, the device will light red indicator light and flash quickly, often press the function button, the indicator light will switch to blue, and flash quickly, that is, enter wireless reception. State
- Insert the 3.5MM audio cable into the 3.5mm audio port on the device, and insert the other end of the audio cable into the AUX port of the playback device (headphone, speaker, etc.); 3. Turn on the wireless function of the mobile phone (or computer), search for the surrounding wireless devices, find a device named T-10 in the search results, find it and match it with it. After the pairing is successful, the indicator light on the wireless receiver becomes Constantly lit state
Note:
- Different wireless devices (such as wireless headsets) will have different search connections depending on the solution and protocol used.
- 1f the pairing connection fails or cannot be connected for a long time, you can shut down and re-pair the connection once.
Troubleshooting
When you encounter the following problems, you can try the following solutions, if there is still a problem after processing? Please contact your local dealer and do not start the repair yourself, so as not to cause unnecessary trouble!
The wireless audio adapter is not working properly?
- Please check if the power supply of the USB port is normal? Is the power indicator on the device lit? Also try to change the power of the USB port.
- No sound output? Please check if the 3.5MM audio cable is connected correctly?
- If the wireless device (such as a wireless headset) is not connected, the wireless receiver can be close to some distance, or the device can be powered off and restarted once.
- Due to the different wireless receiver chip solutions and transmission protocols, there may be pro blems that cannot be paired. We are constantly striving for optimization.
Launch mode display
Receive mode display
Tips: USB wireless adapter power consumption is low, when using mobile power supply, some will automatically turn off the power, priority is to use USB charger power supply, some TV USB port power supply is insufficient, will cause the adapter can not work properly.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. in
portable exposure condition without restriction.