Guangzhou Ovovs Lighting OL2071SRGB RGB LED Light Instructions
- June 6, 2024
- Guangzhou Ovovs Lighting
Table of Contents
Guangzhou Ovovs Lighting OL2071SRGB RGB LED Light
Instructions Manual
This instruction is for all the LED lights that use the Ble_Light APP for the remote.
Step 1:
Please check that all the plugs are connected tightly. If the connec tion is
loosened, then the LED lights may not light up, so please make sure all the
plugs are connected tightly.
Step 2:
Connect the lights and the wiring harness to the control box, a red wire
connects to ACC(12V DC), black wire connects to the negative electrode.
Step 3:
There are two methods to download the APP.
Method1:
Scan the QR code on the control box to download the Ble_Light app as the
picture show.
Method 2:
IOS: Search “OL-blue light” on APP Store as the picture show.
Android: Search “OL-blight” on APP Store as the picture show.
After you download the Ble_Light app, please reference below “Ble_Light
Operating Instruction” to start control LIO° n mn </Ando]-” I the color of the
RGs LED hi@hts.
Tips:
- Please connect all the LED lights together before they connect to the power, avoiding strong current making the lights burn.
- Please Do Not put the control box nearby the engine or any hot places. The Working Temperature of the control box is -20°C-+ 70°C. The control box is not waterproof, so please keep it somewhere dry. And please place the control box to non-metallic substances place, then the connection will be better.
- if you connect the control box red wire to the battery, black wire to negative, then the RGB LED lights will need to use the app to switch it off.
- Please turn on the location permission of your phone before using the app, to make the app find out the RGB LED lights. If your phone has already turned on the location permission, please ignore this tip.
BLE_Light Operating Instruction
-
Go to “setting”>”Bluetooth”, and open the mobile Bluetooth
-
Click slide left/right to switch between the “Home” and “Function” interface. Pie. A
-
Click “Home”>”Light List”>”Scan”, select the scanned BLE_Lights, then click back to your “Light List”. Pic. B&C&D
-
click in this icon then clicks connect. Pie. D&E
-
(1 )Adjustment of key lights’ color on the color disk
(2)control the key light’s on/off
(3) Sliding brightness bar can adjust the brightness of the lights
(4)Click. this icon, to set white lighting
(5)Click, this icon, DIY the color on the picture from the album, or take a photo. Pie. E&F
-
Group Control: Click group – “light list interface”, setting up a new group and controlling the lights in the group.
Warm Note: APP can connect at most 4 light kits. Any group combination ways to control all the lights, a single control is also available. Pie. G&H
-
Click “Home” > “Scene Modes”, enter the Scene Mode interface and click the upper right icon to select the lights which need to be controlled, then select the scene mode and the lights will turn to the selected mode. Pie. I
-
Click “Home” > “Music”, enter to Music interface, and click the upper right icon to add music to the music list, then the light color will change with the music rhythm. Pic. J
-
Click “Home” > “Clock”, entering to the Clock interface to add a new clock. Pie. K
-
Click “Home” > “Setting”, entering to Setting interface to modify the connection password or reset the password. Pie. L&M
Warm Note:
1. Light’s original password: 000000
2. Modify Password interface can only modify the connected light’s password. The corresponding light will be flashing when modifying the password. -
Reset Password: When you forget your light’s password, you can reset your password.
(1 )Scan and add the lights which need to reset password in Light List interface. Pie. N
(2)Click “Home” > “setting” > “Reset Password”, then there will display the added lights and these lights haven’t connected. Pie. 0
(3)Cut the lights’ power and then power on, click the light’s name in the 30S and there will Pop-up reset password box. Input password and click confirm, then the system will tip password reset successfully. Pie. P
If you have any questions about this RGB LED light, please feel free to contact us with an order ID, we will do our utmost to assist you.
OL-2071 SRGB RGB LED Light
Electric Parameter
Input Parameter: DC 12V
Turn Signal: 0.07A
Low Beam: 2A
High Beam: 2.63A
Wire Diagram:
| 1-GND | 5-High Beam |
|---|---|
| 2-Control Box Positive(Red Wire) | 6+7Connected |
| 3-Turn Signal(Yellow Wire) | 8-Control Box |
| 4-Low Beam |
- High beam and low beam connects to OEM Headlights’ socket (H4 Plug)
- Turn signal connects to OEM turn signal-positive(Yellow Wire)
- RGB Control Box positive connects to ACC(Red Wire)
- RGB Control Box negative connects to ground(Black Wire)
- No.6 connects to No. 7
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
( 1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Con n e ct the equipment into an outlet on a circuit different from that to
- which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>