NOAM NBTR Marine Bluetooth Controller Owner’s Manual
- June 6, 2024
- NOAM
Table of Contents
NBTR
Marine Bluetooth® controller OWNER’S MANUAL
Warning
This product can potentially expose you to chemicals including lead, nickel,
and chromium which are known to the
The state of California to cause cancer and birth defects or other
reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Thank you for making N@M your choice for marine audio entertainment!
NBTR
Marine Bluetooth® controller
- Designed for marine and Powersports applications.
- IPX6 water resistance rating.
- For all elements.
- Bluetooth® connectivity.
- Wireless connection range up to 35ft. *
- 3.5mm jack auxiliary audio input.
- RCA pre-output and remote turn-on to connect external amplifiers.
- Use it as a stand-alone source unit/receiver.
- Easy to use – LED illuminated push buttons.
- One hole design for easy installation.
- Including 9′ RCA cables and a NOAM rocker switch.
- Conditions may vary the maximum range.
Bluetooth® Pairing and Connection
Power:
1. Long press the power button to power on/off.
Wireless Bluetooth® Streaming Connection:
a. Ensure Bluetooth mode is activated, then search for the NBTR from your
Bluetooth-enabled device. The light will blink short and fast while waiting
for a Bluetooth connection.
b. The NBTR Bluetooth Network Name will appear as “NOAM” (No password is
required for connecting).
c. When the Bluetooth is connected, the light will blink slower.
AUX-IN
a. Short press to switch Bluetooth mode to Aux-in mode.
Auto Reconnection:
a. When the Bluetooth device is out of range, the NBTR’s Bluetooth will
disconnect automatically and the buttons will start blinking short and fast.
b. If within 10 minutes, the Bluetooth device will be back in range, the NBTR
will automatically reconnect to it.
c. If 10 minutes have passed, you will need to manually reconnect with the
NBTR.
Playing Music
1. Long press for 3 seconds to power ON or OFF.
2. Short press to play music or pause.
3. Short press, to switch Bluetooth mode/Aux-in mode.
4. Short press” tor volume up, press and hold” tor next track.
5. Short press “ “; or volume down, press and hole “ ” for previous
6. Press and hold **BT PAIR** to disconnect Bluetooth.
Installation (Seamless Flush Mount)
Size:
- 3.43″ (Overall Diameter)
- 2.76″ (Overall Depth)
- 2.75″ (Mounting Hole Diameter)
- 2.20″ (Mounting Depth)
Wire Diagram
Wire Color ……………………..Description
Yellow ———— Battery (+), 12dc
Black ————– Battery (-), Ground
White————- Line out-L
Red—————- Line out-R
Red—————- ACC
Blue ————— REMOTE
Red ————— 2-rocker switch power wire
Black————– 3-rocker switch Ground wire
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.