Shenzhen Hengyaowei Industrial HYW-01 Star Projector Night Light Instruction Manual
- June 6, 2024
- Shenzhen Hengyaowei Industrial
Table of Contents
Shenzhen Hengyaowei Industrial HYW-01 Star Projector Night Light
Model, HYW-01
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING
PACKAGE LIST
- UFO Star Light Projector: lPcs
- USB Type-C Cable: lPcs
- User Manual: 1Pcs
- Remote Control: lPcs
PRODUCT PARAMETERS
- Product Model: HYW-01
- Projector Wattage : 2*1.5W(MAX)
- Laser Light Wattage: <5mW
- Night Light Wattage: 18*0.2W(MAX)
- Voltage: DC 5V/1A
- Battery Capacity: 3.7V lBOOmAh
- Product Dimensions: 150*92mm
- Working Temperature: -20-+40″C
- Storage Temperature: – 20-+65°c
- Projection Area: 10-40ni
DIRECTIONS
-
Be careful do not look directly at the laser light and projector.
It is recommended to place it in a high place. -
Use the type C cable to connect the type C interface of this product and the USB power adapter.
-
Press the on/off for 2 seconds until the light turns on.
-
Mobile phone or computer Bluetooth connection” HYWOOl”.
-
Press the touch button or remote control to choose your favorite projection or night light mode.
OVERVIEW
ATTENTIONS
-
Please do not disassemble the product and battery by yoursef. The battery is forbidden to be disassembled, impacted, squeezed or thrown into fire; if severe swelling occurs, please do not continue to use it; do not place the product in a high tempe rature environment
-
This product is a high-power LED and laser combination projector lamp.
Please do not look directly at the projector light and laser light W you feel unwell, please
tum it off immediately. Do not let children use this product alone. -
Using this product in a place with strong ambient light will affect the projection effect.it is recommended to use it in a dark environment
-
It is recommended to use this prcx:fuct indoors or in a car with a ceiling. The ceiling height exceeds 5 meters or the outdoor environment without a celing, will affect the projection effect.
-
The light source of this product is not replaceable; when the light source exp;res,
the entire lamp should be replaced. -
Please charge the item with DC SV lA adapter. It’s not compatible with any other adapters that below 3V. When charging, the indicator light is red, it will turn off after full charged. The full charging time is about 3.5 hours.
-
Please use this product within an ambient temperature between CJ’C to 40″C.
INSTRUCTION OF REMOTE CONTROL
- On/Off
- LED On/Off (projector, night light and laser)
- Adjust the brightness of night light
- Adjust the color of night light and projector light
- Music mode (make the light dance with music)
- On/Off for the projector light
- Motor speed adjustment (fast /slow /off /medium)
- Volume+
- Pause/ Play
- Previous song
- Next song
- Volume-
- Laser On/ Off
- On/ Off night light
- Timing for 1 hour
- Timing for 2 hours
- Cancel timing
- Modes for the projection
DISCLAIMER
The product which you have purchased is verified to be genuine products which
has been sold, we are responsible for the products only. The production is
under the strict monitoring and control.
We provide the after-sale service (after confirmation by the merchant is the
product quality problem to give maintenance, warranty or return service).
In addition, the brand is not responsible for any damage caused by the
customer privately.
Email
US , Buyerfeedback@outlook.com
EU : ruiodrbrand@outlook.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>