Shenzhen 5517 E Commerce Bluetooth Alarm Clock User Manual
- June 6, 2024
- Shenzhen 5517 E Commerce
Table of Contents
5517 E-Commerce Bluetooth Alarm Clock
User Manual
APP side
- Alarm clock interface
- Setting interface
- Introduction of setting function
KIDS TRAINING ALARM CLOCK
-
The main interface display description of the alarm clock
-
Display on other pages of the alarm clock
-
Alarm setting: long-press the adjustment button Enter the settings page. Short press the adjustment key Switch setting options. by Adjusting the alarm clock on, alarm time setting, and alarm cycle. The drawing board shows on to indicate that the alarm clock is on;
-
The drawing board shows off to indicate that the alarm clock is off;
-
Drawing board display—-means the alarm clock does not loop;
-
The drawing board displays 1-5 indicating Monday to Friday;
-
The drawing board displays 1-6 for Monday to Saturday;
-
The drawing board displays 1-7 for every day.
3. Description of the keys on the alarm clock
4. Key operation instructions on the alarm clock
-
Charging/power indicator When the low voltage is prompted, the Bluetooth function is automatically protected, please use it after charging.
-
When charging Always bright, full Off When the battery is lower than 20% (voltage lower than 3.5V), it flashes to remind the low voltage. Power is lower than 10% (voltage lower than 3.3V) deep sleep, only time, no other functions. Low power protection (note that once shut down and deep sleep, the product can only be activated by charging with an external power source).
Alarm setting: long-press the adjustment key Enter the setting page. Short press the adjustment key Switch setting options. by the alarm on, alarm time setting, and alarm cycle. Adjust the Snooze mode Long press the adjustment key page. Turn on/off the snooze mode. Enter the settings Turn on the snooze mode: short press the adjustment button Turn off the alarm and it will sound again in 10 minutes. Long press the adjustment key The alarm clock no longer goes off. -
Time and date setting: long press Key to enter the setting page. Short press the adjustment button to go to the time setting page. by Adjust date and time
-
12/24 hour format Long press Press to enter the setting page. Short press the adjustment button to switch to 12/24 hour format. by Adjusting the 12/24 hour system.
-
Temperature unit: long press Key to enter the setting page. Short press the adjustment key to the temperature setting interface. by the temperature unit. Adjust
-
Volume adjustment: through Adjusting the volume level.
-
Illumination setting: short press (automatic color change)/off KeyCycle switching white light/color light
-
Sound control night light Long press KeyTurn on/off the sound control night light. Control the white light. If the app is controlling white or colored lights, the voice control function is disabled.
-
Bluetooth settings Bluetooth function. Long press the Bluetooth button Turn on/off the
-
Countdown function Press key enters the countdown setting page and then passes the countdown. After setting the countdown time, press To start
-
Bluetooth Speaker Open the settings->Bluetooth function in the phone, find the Bluetooth of the alarm clock, after the Bluetooth of the phone is connected to the Bluetooth of the alarm clock, the alarm clock can play music as a Bluetooth speaker.
APP side
1. Alarm clock interface
Add device: Click the + sign in the upper right corner to enter the add device interface, and then add the device after entering, then long-press the Bluetooth button on the left side of the alarm clock to add the device
2. Setting interface
3. Introduction of setting function
- Time setting: set the current time
- 24-hour system: switch between 12 hours or 24 hours
- Countdown: Set the countdown time
- Hourly hour: set the hourly hour
- Temperature unit: switch c or r
- Night light setting: switch the color of the alarm frame light
- Rest screen time: set rest screen time
- Sound: Set the alarm sound size or Bluetooth sound size
- Voice control night light: turn on voice control or turn off voice control
- Sleep training: set the sleep time and remind you to sleep when the time is up
- Remind later: turn on or off snooze mode
- Firmware version: display the alarm clock version number
- Mac address: display Bluetooth address
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.